VX115 series VX115 BASS 15″ + 1″ High Frequency CD Bass Enclosure Hartke
VX115 Introduction and Features Congratulations on purchasing the VX115 bass enclosure by Hartke! Continuing Larry Hartke’s legendary commitment to bass players, the VX “Very Extreme” Series enclosures have been designed to provide excellent tone with a warm punchy output. The VX115 features a 15”, proprietary low frequency driver with specially treated cones, impregnated fabric surrounds and matched convex dust covers all mounted in a heavy duty steel frame.
Connecting the VX115 About Impedance Before you hook up your speaker cabinet, be sure that you understand a little about impedance. Impedance is the electronic load that the speaker puts on the power amplifier and is measured in Ohms. Here is the tricky, yet simple rule of impedance: When two speakers are wired in "Parallel" the total impedance is cut in half and when two speakers are wire is “Series” the total impedance is the sum of the speakers individual impedance.
VX115 Specifications Type Impedance (Ohms) Low Frequency Drivers High Frequency Driver Weight Dimensions Power Handling Weight Bass reflex speaker enclosure 8 Ohms 15″ Special Design, 8 ohm, 300 watt Speaker 1″ Throat Compression Driver 52 lbs. (30.9 kg) Height:25″ (62.2 cm) Width: 25″ (62.2 cm) Depth: 15″ (47.0 cm) 300 Watts Peak Power Handling 53 lbs. (24 kg) Specifications subject to change without notice. Hartke Distributed Worldwide Exclusively by: Samson Technologies Corp. 575 Underhill Blvd.
