VX410 VX410a series VX115 BASS 4 x10″ + 1″ High Frequency CD Bass Enclosure Hartke
VX410 and VX410a Introduction and Features Congratulations on purchasing the VX410 or VX410a bass enclosure by Hartke! Continuing Larry Hartke’s legendary commitment to bass players, the VX “Very Extreme” Series enclosures have been designed to provide excellent tone with a warm punchy output. The VX410 and VX410a features four 10” proprietary low frequency drivers with specially treated cones impregnated fabric surrounds, matched convex dust covers all mounted in a heavy duty steel frame.
Connecting the VX410 and VX410a About Impedance Before you hook up your speaker cabinet be sure that you understand a little about impedance. Impedance is the electronic load that the speaker puts on the power amplifier and is measured in Ohms. Here is the tricky, yet simple rule of impedance; When two speakers are wired in "Parallel" the total impedance is cut in half and when two speakers are wire is “Series” the total impedance is the sum of the speakers individual impedance.
VX410 and VX410a Specifications Type Bass speaker enclosure Impedance (Ohms) 8 Ohms Impedance Power Handling 400 Watts Peak Power Handling Low Frequency Drivers 4-10″ Special Design 8 ohm, 100 wattSpeakers, 1″ Throat Compression Driver High Frequency Driver Dimensions Height:25″ (62.2 cm) Width: 25″ (62.2 cm) Depth: 15″ (47.0 cm) Weight VX410 VX410a 72 lbs. (32.6 kg) 70 lbs. (31.68 kg) Specifications subject to change without notice.
