HARVATEK 5mm Infrared Lamp HE3-245AC-XXXX Harvatek International Infrared Through-Hole Lamp HE3-245AC-XXXX Official Product HE3-245AC-XXXX Data Sheet No. Customer Part No. **************** HE3-245AC-XXXX Specifications are subject to change without notice. Data and drawings herein are copyrighted. August 5, 2009 Version of 1.
HARVATEK 5mm Infrared Lamp HE3-245AC-XXXX DISCLAIMER HARVATEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. HARVATEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others.
HARVATEK 5mm Infrared Lamp HE3-245AC-XXXX Orderable Information H E 3 - 2 Series Name 4 5 A C - X Description Code X X X Customer Code HE3: 245AC: XXXX Harvatek IR Lamp, 940 nm 5mm with 45 degree viewing angle Customer Product Code Dimensional Drawing: Official Product HE3-245AC-XXXX Data Sheet No. Customer Part No. **************** HE3-245AC-XXXX Specifications are subject to change without notice. Data and drawings herein are copyrighted. August 5, 2009 Version of 1.
HARVATEK 5mm Infrared Lamp HE3-245AC-XXXX Absolute Maximum Rating (@ 25oC) Parameter Symbol Spec Unit Power Dissipation PD 170 mW Reverse Voltage VR 5 V Forward Current IF 100 mA Reverse Current IR 10 µA Pulse Forward Current IFP 1 A Operating Temperature Range TOPR -40 to +85 °C Storage Temperature Range TSTG -40 to +100 °C * Lead Soldering Temperature (3mm from body), 260° C for 5 seconds. Electrical and Optical Characteristics (@ 25oC) Parameter Symbol Spec min. typ.
HARVATEK 5mm Infrared Lamp HE3-245AC-XXXX Characteristic Curves Official Product HE3-245AC-XXXX Data Sheet No. Customer Part No. **************** HE3-245AC-XXXX Specifications are subject to change without notice. Data and drawings herein are copyrighted. August 5, 2009 Version of 1.
HARVATEK 5mm Infrared Lamp HE3-245AC-XXXX Soldering Profile Method Hand Soldering DIP Soldering Lead Frame Type / Holder Type 1. Temperature at tip of iron: 400° C MAX (30W MAX). 2. Soldering time: 3 seconds MAX 3. Distance: 5mm MIN (from solder joint to case) 1. Preheat temperature: 100° C MAX, 60 seconds MAX 2. Bath temp: 260° C MAX 3. Bath time: 5 seconds MAX 4. Distance: 3 mm MIN (from solder joint to case).
HARVATEK 5mm Infrared Lamp HE3-245AC-XXXX Revision History Changes since last revision Page Initial Release – XXXX Version No. 1.0 Revision Date 08-05-2009 Official Product HE3-245AC-XXXX Data Sheet No. Customer Part No. **************** HE3-245AC-XXXX Specifications are subject to change without notice. Data and drawings herein are copyrighted. August 5, 2009 Version of 1.