User's Manual

10 11
Turning on the Power Switch

Flash starts charging.
     
     
    

disabled. Please change the bat-
teries immediately.
       
   

    
Section 12.3).
    

     

     

7.3
C au t io n
1.      

after a certain period of idle use,


may damage batteries. Therefore,
      
is not used for long periods of
time. AA-sized alkaline, Ni-HM or
lithium batteries can be used.
2. To avoid overheating and degrading

-

for at least 10 minutes.
     

inner overheating prevention fun-
ction may be activated to prolong
the recycling time to about 8 – 20
  
    
       -


return to normal.
Adjusting Flash Head
    

the surface before illuminating the
    
behind the subject for a more natural
looking shot. This is called a bounce

7.4