Datasheet

Connections
Cautions before connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their
terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off to avoid any issues.
Connect 21-pin EURO-SCART (AV1 IN)
Interface on the rear of the Unit
2
4
6
8
10
12
14
16
18
20
1
3
5
7
9
11
13
15
17
19
21
21-pin Euro-SCART
connector
Decoder
21-pin Euro-SCART (RGB)
1. Audio right output 8. AV control 15. RED input
2. Audio right input 9. Earth for green 16. RGB control
3. Audio left output 10. Not used 17. Earth for video
4. Common earth for audio 11. GREEN input 18. Earth for RGB control
5. Earth for blue 12. Not used 19. Video output
6. Audio left input 13. Earth for red 20. Video input (PAL/SECAM/NTSC)
7. BLUE input 14. Not used 21. Plug shield
TV
AV1
AV2
SVIDEO
D-Sub
Video1
SOURCE
1. Turn on your LCD TV , press Source button on the remote control.
2. Press CH+/- to select AV1 and press VOL+ to confirm or wait for about 5 seconds.
3. Turn on the decoder.
4. Set the Scart Output item (in System menu) to TV and select a proper channel through
the Scart Output Channel item. For detailed operation, please refer to [Setting Scart
Output] in page19.
To watch decoder
Connect the 21-pin Euro-SCART between the unit and decoder.
How to connect:
9
DC 12V
VGA
-
PC AUDIO
PHONE
RF
-
S VIDEO
(SCART
)
AV1
L
R R
AUDIO
AV2 IN AUDIO OUT
VIDEO
L