Datasheet

Connect a VCR for recording or external amplifier
How to connect:
Connect the 21-pin Euro-Scart between the Scart Interface on the unit and VCR.
Connect the Audio cables between the Audio (L/R) jacks on the unit and external amplifier.
- or -- or -
Note:
<
The Scart can not output VGA picture/sound signals.
<
When you use the Scart interface to record a source, you may view other source simultaneously. To do this, make sure to set the
Scart Output item to a proper selection:
-TV for recording a TV program while viewing whatever source simultaneously.
-Monitor for recording what on screen (except a VGA picture).
When Monitor is selected, you may record the source from which (e.g. AV2 or TV) the unit was switched to VGA while you may
watch a VGA source simultaneously. For detailed operation, please refer to [Setting Scart Output] in page19.
Connections (continued)
RLVIDEO
AUDIO
WW
RR
Yellow (VIDEO)
White (AUDIO L/MONO)
Red (AUDIO R )
WW
YY
RR
Audio
cable
DC 12V
VGA
-
PC AUDIO
PHONE
RF
-
S VIDEO
(SCART
)
AV1
L R
AUDIO
AV2 IN
VIDEO
Interface on the rear of the Unit
AV OUT
RLVIDEO
AUDIO
-
S VIDEO
ANT INANT OUT
AV IN
Rear of the VCR
12
21-pin Euro-SCART
connector
VCR for recording
R
AUDIO OUT
External Amplifier
WW
RR
To Audio inputs
1. Turn on your LCD TV, select a program.
2. Turn the main volume of the amplifier to minimum.
3. Turn on the amplifier and adjust for a proper volume.
To enjoy high-quality sound through an external amplifier
L
To record program (using Scart interface)
1. Turn on your LCD TV, select a program (TV or AV2) you wish to record.When select AV2, please make sure to set the
Scart Output to Monitor.
2. Turn on your VCR, insert a videotape for recording.
3. Press the Record button to begin recording.