Datasheet

Setting Picture
Customizing the Picture
1
If the Picture menu does not display, press VOL+/- repeatedly
to display Picture menu page.
Press CH+/- to select the item you wish to change.
Press VOL+/- to adjust the value of the item.
4
Using the Preset Picture Mode
The LCD TV set provides three preset picture modes (Bright,
Nature and Soft) and one user-set picture mode (User). You can
quickly select picture mode by pressing the P. P button.
Each preset mode has its own picture settings.
Bright: Select for a bright picture.
Nature: Select for a normal picture.
Soft: Select for a fine/soft picture.
Adjusted settings are stored in User mode.
Press MENU to display the menu main page.
1
Press MENU to display the menu main page.
2
3
brightness
contrast
color
sharpness
tint
50
50
16
16
-10
Press VOL-
Decrease contrast
Lower color intensity
Soft picture
Towards purple
Adjustment item
Contrast
Color
Sharpness
Tint *
Value range
0 – 100
Press VOL+
Increase contrast
Higher color intensity
Sharp picture
Towards green
The Tint item is for NTSC only.
You can quickly adjust the Brightness by using the or button.
Note:
Bright
WIDE Mode Settings
Blue Screen
Scaler Mode
Video Standard
Audio Standard
Sleep Time
Scart Output
Off
Fill All
Auto
B/G
0 minutes
Monitor
Press VOL+/- to display System menu page.repeatedly
2
Press CH+/- to select Scaler Mode item.repeatedly
3
Press VOL+/- to select Fill All or Wide.
4
Fill All
The Fill All mode stretches the input vertically and horizontally to fill the display.
Wide
If the signal is 16:9, this mode acts as if it is in Normal mode.
If the signal is 4:3, the top and bottom sides of the picture are compressed with a black stripe on top and bottom of the
screen.
0 – 32
0 – 32
-32 – 31
Less bright More bright
Brightness
0 – 100
18
You can quickly select the Scaler mode by using the button.
Note: