Datasheet

Adjustment in PC (VGA) Mode (continued)
Changing the Position of Image
Press MENU to display the menu main page.
1
Press CH+/- to select h position or v position item.
3
Press VOL+/- to adjust the value of the item until the screen is
well-aligned.
4
After connecting the unit to your PC, adjust the position of the screen if it
is not well-aligned.
Press VOL+/- repeatedly to display Screen menu page.
2
Press MENU to display the menu main page.
1
Press VOL+/- repeatedly to display Screen menu page.
2
Adjusting the Phase and Frequency
Press CH+/- to select phase or frequency item.
3
Press VOL+/- to adjust the value of the item.
4
You may find that images blur, depending on the clock phase of your PC's Processor. If you experience blurring ,
you can obtain a clearer image by adjusting the phase setting.
Adjust the clock frequency of the set's internal clock signal. If shimmering or rainbow-like noise is apparent in
the image, try adjusting the frequency setting.
h position
v position
phase
frequency
50
50
16
900
h position
v position
phase
frequency
50
50
16
900
Setting Sleep Time
Using the Menu
Press the Sleep button to display Sleep Time menu bar.
1
Press VOL+/- to adjust.
2
3
Press the Sleep button again to exit.
Press CH+/- to select Sleep Time item.
3
Press VOL+/- repeatedly to display Tools menu page.
2
Press MENU to display the menu main page.
1
Press VOL+/- to set a proper sleep time.
The Sleep Time can be selected between 0, 10, 20, 30, 60, 90, 120,
180 and 240 minutes.
4
Using the Sleep button
Sleep Time
30 minutes
Sleep Time
30 minutes
26