[eves 1 « FIx the feet (05) under the Base (01) with bolts (H). « Apply the protective felt covers (I) on the bottom of the feet (05). [sere 2 « Connect the Base (01) into the Side Panels (03) with dowels (A) and bolts (B). « Connect the Top Panel (02) onto the Side Panels (03) with dowels (A) and Mini fix hardware Apply adhesive covers on the Mini fix hardware (D).
[ayes 2 « Place the Rear Panel (04) with the painted face turned down Into the module and fasten it with nails (G). (18P 4 + Fix the handle (K) in Front of the drawer (06) with bolt (L). * Connect the parts (06), (07) and (08) with dowels (A) and Mini fix hardware + Apply adhesive covers (E) on the Mini fix hardware (D). + Insert the Base of the drawer (09) Into the channel in the Front of the drawer (06), as shown in DETAIL 4, and align their edges with the Side Panels of the drawer (07).
[tires & IMPORTANT! The Nightstand 2.0 can be installed in two or more modules compositions. « Place a module next to another, properly align the edges and apply bolts (F). « With the drawers already assembled, Insert them In the module, fitting the climatic sides so that side smoothly.