Installation & Assembly

18LT PENDANT LIGHT

ASSEMBLY/INSTALLATION INSTRUCTIONS

installation.

shock.

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

referencing the illustrations on the installation instructions.

Phillips screwdriver.

CAUTION

GENERAL

TOOLS REQUIRED

ASSEMBLY AND INSTALLATION

(CONT.)

Turn off the power at fuse or circuit breaker.

Turn on the power at fuse or circuit breaker.

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,

CONSULT A LICENSED ELECTRICIAN.

JUNCTION BOX

MOUNTING SCREWS

WIRE CONNECTORS

CROSS BAR

GROUND SCREW

BALL NUTS

1. Gently take all parts out of the package, lay them on a smooth surface, unscrew the BALL NUTS

and the FIXTURE SCREWS. Attach the CROSS BAR to the JUNCTION BOX using (2) MOUNTING

SCREWS.

2. Install STEMS based on the desired length of the item, adding CEILING PLA

3. Install LAMP HOLDER on the FIXTURE.

4. Make wire connections with WIRE CONNECTORS:

A - Connect the black wire from Fixture to the black supply wire.

B - Connect the white wire from Fixture to the white supply wire.

connect it to the supply ground wire with a WIRE CONNECTOR. Carefully tuck wires back into the

JUNCTION BOX.

5. Attach the CEILING PLATE to the CROSS BAR through SCREW HOLES as shown, and secure it

with BALL NUTS.

6. Install BULB (not included). See relamping label at socket area or packaging for maximum allowed

wattage.

FIXTURE SCREWS

SCREW HOLES

CEILING PLATE

STEMS

Please read carefully and save these instructions, as you may need them at a later date.

LAMP HOLDER

BULB (not included)

FIXTURE