H4D User Manual H4D-60 H4D-50 MS H4D-50 H4D-40 H4D-31
H4D C O N T E N T S Introduction 4 Lens cap 32 System requirements 8 Filter s 32 Warnings & restric tions 8 Lens shades 32 Shut ter and aper ture control 32 Depth-of-f ield calculation 33 Depth-of-f ield / visual preview 33 1 H4D models 2 General over view – controls and displays 9 13 Infrared focus set tings 33 14 Focus assist 33 Display information 15 Manual focus 34 Grip display 16 Autofocus 34 View f inder display 17 Single 35 Sensor unit display 18 Continuous
H4D 10 SU – getting started 63 Inter val 106 Set tings check 64 Set tings 107 White Balance / Grey balance 64 Custom Options 108 Media 66 Image Info 113 Tex t set ting 113 Date & Time 114 11 Browsing images 67 Basic image browsing 68 System status 115 Zooming in and out 68 Drive 116 Zooming in for more detail 68 Thumbnail views 69 General 118 12 Preview modes 70 Integral f lash 119 Preview modes 71 Flash measure 120 Histogram mode 72 Full-details mode 73 Bat t
H4D Welcome to Hasselblad ! The sensational Hasselblad H4D builds on and expands the impressive feature set of the much praised H3D camera-line. Developments have raised the bar for medium format photography, placing Hasselblad in first place around the world yet again. Hasselblad cameras, famed for quality and reliability, were chosen to record the lunar missions – there could hardly be better praise than that.
H4D H4D features in abundance Two modes of operation and storage • 'True Focus' with 'APL' (Absolute Position Lock) – patent pending, making autofocus substantially easier and more accurate for photography professionals. The H4D offers a storage choice of either CF cards or a direct computer hard drive connection. With these two operating and storage options, you are able to select a mode to suit the nature of the work in hand, whether in the studio or on location.
H4D Accessories H system accessories include general items such as filters, straps and lens shades etc., as well as specialist items. For instance, the Global Image Locator (GIL) ensures all images captured outside are tagged with GPS coordinates, time and altitude. This data provides the key to a number of future applications involving image archiving and retrieval. One example is the direct mapping of images in Phocus software to the Google Earth application. Then there is the HTS 1.
H4D Phocus Hasselblad RAW Conversion. A smooth, reliable and competent digital workflow is crucial in a working environment. The best medium format digital captures in the world should be handled in a qualified and proficient manner to provide the last links in the chain. Phocus by Hasselblad does just that.
H4D Computer system requirements Digital files naturally end up on a computer for processing. Image-storage and correction requires a certain minimum standard regarding computer capabilities. Large images will require a high-performance computer with plenty of memory, advanced graphics capabilities and a recent operating system. In most cases, the computer should include a FireWire 800/400 connector, which will enable you to load images directly from the camera.
H4D 1 H4D models There are five different H4D models to choose from. Apart from performance and results related to the different specifi cations, there are some very minor differences in handling between the models. However, virtually all the information in this manual applies to all models. When differences do occur, they are marked as such.
H4D This section presents an overview of the technical specifications and the differences between the H4D models. It also highlights any particular information that applies to a particular model. The various H4D models provide a solution for practically all medium-format requirements. All models deliver the same list of advanced features such as True Focus, Ultra Focus etc, regardless of sensor size. Apart from sensor differences, the H4D-50MS model has the addition of the multi-shot feature.
H4D In addition to standard single-shot captures, the H4D-50 MS has a multi-shot capture mode that produces the most accurate color rendering and resolution available on the market today in the medium format. See special section in this manual concerning the multi-shot capture mode. The H4D-50 produces 65 MB raw files that meet most demands to produce the tremendous quality that Hasselblad is world renowned for. TECHNICAL SPECIFICATIONS Sensor size 50 Mpixels (6132 x 8176 pixels) Sensor dimensions 36.
H4D The H4D 40 differs slightly from the other H4D models by featuring very long exposure times of up to 256 seconds. In addition it provides an ISO range from 100 − 1600. Entry-level H4D model featuring a 31 mega-pixel sensor to produce quality far above the best '35 mm' cameras. TECHNICAL SPECIFICATIONS Sensor size 40.0 Mpixels (7304 x 5478 pixels) Sensor dimensions 32.9 x 43.8mm Pixel size 6.0 μm Image size RAW 3FR: 50 MB.
H4D 2 General overview – controls and displays This section provides an introduction to the control buttons' functions as well as the information provided on the display screens.
H4D Button functions − overview Below is an overview of the primary functions of the control wheels and buttons. Some controls have dual or triple functions according to the state of the menu or setting. A full description can be found further on in this manual. Shutter release button MENU button Releases shutter. Also activates came ra from standby mode. Accesses menu. FLASH / (CONTROL LOCK) button Illuminates grip display. Accesses battery status and general information screen.
H4D This overview illustrates the functions and features most commonly needed when shoot ing, and how they are distri buted on the three displays. For example, aperture and shutter settings appear in both the viewfinder and on the grip displays in normal mode but can also appear on the sensor unit display if set to do so. ISO settings appear on the grip and on the sensor unit display but not on the viewfinder display.
H4D Grip display − overview Typical camera grip display. Flash condition indication (No exposure compensation, normal flash synchronisation) Focus setting (Autofocus setting, single shot mode) Drive condition (Single setting) Aperture setting (f/5.6) Shutter speed setting (1/400s) Exposure Value display (EV 13.
H4D Viewfinder display − overview Typical viewfinder display. Note the LEDs will only be visible when activated (by the camera or a setting). Exposure method indication (‘aperture priority’ mode) Aperture setting (f/5.6) Exposure compensation setting reminder symbol Metering method setting (Centre weighted) Focus Assist LED Flash LED Warning triangle LED Exposure compensation setting (+0.
H4D Sensor unit display overview When shooting, the sensor unit can display the information most often required for a quick settings check. The unit's buttons are used to navigate the main menu and change settings. ISO setting White balance Storage medium ISO setting, white balance etc information is retained when navigating the menu. Button function Capture file name IAA rating The unit's buttons are used for navigation and setting changes.
H4D Buttons and controls − details A Shutter release button A This button has half-press and full-press positions. By pressing half-way (or softly) the camera, auto focus function and exposure meter can be activated. By pressing all the way down (or more firmly) the shutter will be released (or the chosen exposure procedure for example, the self timer is activated with this button). FLASH / (CONTROL LOCK) button / (EXIT) B This is a triple function button.
H4D Rear control wheel I The front and rear control wheels are used to make changes in exposure settings, access the various loop sections of the menu for settings as well as navigate the sensor unit’s menu. The effect of the wheels’ direction is customizable. J On the rear of the grip, as well as the rear control wheel, there are a further three control buttons: K True Focus J Activates the True Focus setting. See separate section for explanation of this function .
H4D There are also two control buttons on the viewfinder, as well as the eyesight correction adjustment wheel: Eyesight correction adjustment wheel P The personal eyesight adjustment facility has a diopter range of -5 to +3.5, to suit most users. EV correction adjustment button ON: Q Press this button to access the EV compensation screen. Settings are made with either the front or rear control wheels. An EV correction symbol appearsOFF: on the grip and viewfinder display as confirmation.
H4D Saving settings changes on the grip The basic principle behind making changes is that the appropriate button is first pressed to access the menu and then settings altered by way of the control wheels. The appropriate control wheel is designated by arrowheads alongside the setting description. · Some buttons have a toggle function, the ON.
H4D 3 Camera Body Aluminium cast in one piece Stainless steel shell Integral quick-coupling plate Upgradeable firmware Modular design Integral ergonomic grip Pixel based user interface The H4D camera body is a robust construction of cast alu minium with a stainless steel shell for extreme durability. Photo: Nina Berman / Hasselblad Masters The integral ergonomic grip houses the main control interface and also contains the battery holder.
H4D 1 Carrying strap 2 1, 2 The carrying strap is attached by firstly withdrawing the safety collar. The hook is then freed and attached to the strap lug (fig. 1). Slide back the safety collar (fig. 2) to ensure the hook remains in the locked position between the small protruding lugs. The collar is purposely a tight fit and might need some effort to slide. Rechargeable battery grip 3 The Battery grip rechargeable 7.
H4D Charging the battery 8 8 With the battery removed from the camera, insert the jack plug from the battery charger into the socket on the battery grip. Insert the battery charger into a standard (100–240V~ /50–60 Hz) domestic socket.
H4D Note The lithium-battery grip should be seen as a reserve for emergency use only. 9 Rechargeable battery grip – precautions: The following precautions should be followed: • Connect the battery grip to the camera correctly. • Keep the protective cover in place when not in use. (Short-circuiting across keys in a pocket, for example, could cause a fire risk). • Do not use the battery grip for anything other than H1/H1D/H2/H2D/H3D/H4D cameras. • Do not immerse the battery grip in liquids.
H4D 15 Battery status (rechargeable battery only) 15 An immediate full-screen information and battery status check appears on the grip display by holding down the illumination/battery status button. This screen displays: • the firmware version • the number of captures taken since the last battery recharge / change. • a rechargeable-battery status icon that provides a quick visual check as well as a figure estimate in percent.
H4D 16 OFF 17 From the active screen, press (not click !) the red ON.OFF button for a half second. All buttons (except the ON.OFF button) remain ineffective, producing virtually no demand on the battery. This is the normal mode when transporting or storing the camera or where there might be a risk of inadvertently activating the camera. (However, remove the batteries if you are going to store the camera for a period of more than a few weeks).
H4D 4 Viewfinder Photo: Joao Carlos / Hasselblad Masters Multi-mode light metering Full exposure information 100% image 90° viewing angle for eye-line composition Full image for spectacle wearers Integral diopter adjustment Integral flash unit The viewfinder provides a laterally corrected 100% image at eye-line level. It features a wide-range diopter adjustment to suit most users. The viewing distance is designed to provide full frame view even for eyeglass wearers.
H4D Parts and components – HVD 90x & HV 90x-II A B C D A. Rubber eye cup B. Hot shoe C. Eyesight adjustment wheel E F G H D. Exposure compensation button E. Exposure method / mode button F. Integral flash unit G. Flash unit release button H.
H4D 5 Lenses Rapid and accurate automatic focusing capability Central electronic shutter Instant manual focus override with natural friction Instant automatic-focus access in manual mode Non-rotation of filter or accessory when focusing Non-rotation of focus ring in automatic focusing mode Flash sync at shutter speeds from 256s to 1/800s Automatic detection of extension rings and converters C type lenses from the V system can be used in combi nation with CF Adapter (optional accessory)
H4D Parts and components 1 A. B. C. D. E. A B C D 2, 3 Remove the front protective cover on the camera body by depressing the lens release button and keeping it depressed while turning the cover counter-clockwise. Remove the rear lens cap by unscrewing it in a counter-clockwise direction. Align the index on the lens with the index on the camera body and rotate the lens clockwise (bayonet fitting) until it clicks into place.
H4D Depth-of-field can be calculated as follows: 7 1. Focus the lens as required. 2. Make an exposure reading (auto or manual) and note the aperture setting. 3. Find the markings on either side of the central index that correspond to the chosen aperture. 4. From these two markings, read off on the required lens distance scale the two corresponding distances. 5. The depth-of-field (at that particular aperture and focus setting) will be the area included between these two distances.
H4D Note Note Some lenses have extra characteristics that require further explanation. For example, the autofocus range on the HC 4/120 Macro lens can be limited by a specific setting on the camera allowing for near range, far range or full range. This only appears on the grip display together with that particular lens. HCD lenses were formulated for use with the smaller size sensors in the H-series, resulting in a reduced coverage for the larger sensors used in 60 Mpix models.
H4D Manual focus 1 There is both a Manual focus mode setting and a Manual Override capability. Manual focus is a specific setting that you actively make, whereas Manual Override is always available as a temporary override of an autofocus setting. AF In Manual focus mode, focusing is carried out by rotating the focusing ring in the conventional manner. The focus setting remains until changed as with a conventional non-autofocus lens.
H4D Note though that in this mode the lens will focus at a distance and will remain focused at that distance while pressure remains on the shutter release button. In this way, you can focus on a nearby object for example, temporarily positioned within the focusing zone on the viewing screen and then without releasing pressure on the shutter release button, recompose knowing that the focus remains on the object chosen even though it is now outside the focusing zone.
H4D 1 AF True Focus can be used with longer lenses, smaller apertures etc but the further you come from situations similar to the 'ideal' as described above, the less the effect will be until it has no visible effect at all. Please remember that although True Focus can noticeably improve a demanding shoot it will only work effectively in the specific circumstances it was designed for. See an explanation of True Focus and further details about use towards the end of this chapter.
H4D True Focus and Absolute Position Lock The obvious situation that would most benefit from using True Focus would be a fashion shoot with a fairly wide angle lens at a large aperture setting and where the central area of the image is clothing while retaining focus on the model's face.
H4D True Focus True Focus can be used in combination with other autofocus settings to achieve various functions. Activated by shutter release button – True Focus retained 1 MENU 2 3 1/2 ! 4 In this mode the autofocus function is effectively converted into the True Focus function. That is, focus is set by half-pressing the shutter release button. Remember, though, that the True Focus function is retained until turned off in Custom Options. 1.
H4D 5 Light Metering & Exposure Control Three metering methods Five exposure method Extremely accurate light metering The light metering system of the viewfinder is capable of selective sensitivity producing three reflective metering methods: Average, CentreSpot and Spot. All methods are measured in increments of 1/12 EV. Information transfer is rapid and automatic ensuring consistently correct exposure settings even in difficult and changeable lighting situations.
H4D Light metering and exposure control 1 ISO/WB 2 F Two primary factors have to be considered when making exposure control choice, namely, metering method and exposure method: Metering method determines in which manner the light measurement is made and how much of the image is taken into account (Centre Weighted, CentreSpot and Spot). Exposure method involves the parameters and deciding factors about how the light measurement is translated into aperture and shutter speeds.
H4D Metering method Centre Weighted (23 x 20 mm) ≈ 25% There are three metering modes available. All three are reflective methods (measuring the light reflected off various selected parts of the subject according to method) and are through the lens (TTL).
H4D 1 Manual Exposure – M 2 Manual mode will provide total user control of the shutter and aperture settings. EXP To set the Manual mode, proceed as follows with the camera in active mode: R 1) Press the EXP button on the viewfinder. 2) Turn the front control wheel in either direction until you reach M (Manual). 3) Press Save (ISO / WB button) to retain the setting. 3 In this mode the shutter speed and aperture settings are m anually chosen by turning the front and rear control wheels.
H4D 1 Programmed variable: Pv - This mode is very similar to Programmed, except with the additional parameters of lens focal length being automatically taken into account. For example, long shutter speeds will automatically be avoided with a long focal length lens. 2 EXP F To set one of the modes, proceed as follows with the camera in active mode: 3 1) Press the EXP button on the viewfinder. 2) Turn the front control wheel (either direction) until you reach the required setting.
H4D b) The AE-L button also allows the spot metering function to make zone placements. When the AE-L button is pressed, the metered area is saved as a mid-grey (Zone 5). When the spot area is then placed over another part of the scene, the new area is then compared to the saved area and the difference can be read off the scale seen in the viewfinder.
H4D Exposure compensation/Quick Adjust The exposure compensation facility, for both manual and automatic modes can be set from -5 to +5 EV, in 1/3, 1 or 1/2 EV increments (Custom Option #3) and is visible above the scale in the viewfinder and as a ± symbol on the grip display. Custom Options #3, #17 and #23 used to deactivate and alter the settings for the rear control wheel/Quick Adjust facility. The quickest way to make an adjustment in auto-exposure mode is use the rear control wheel.
H4D 7 Profiles Profiles not only allow for rapid setup in changing working environments but also ensure an element of security.
H4D Profiles The profiles feature allows rapid access to pre-determined combinations of settings that increase the speed and security of workflow. One example might be in a social situation where there might be a need for formal outdoor portraiture followed by informal indoor handheld flash-assisted wide-angle shots, both situations requiring very different settings in a stressful environment.
H4D 1 3) Use the scroll bar to go through the list of profiles. Choose a Spare profile or a named profile (except Default). You can either save the new profile under the original name or you can change it 4) Press Save (ISO/WB button). The Profile name screen is then displayed where you can rename the profile to what suits you (see section Image Info 4.2 for procedure details ). To use a profile from the main screen, press the PROFILES button to reach the profiles screen again.
H4D 8 Sensor unit – introduction Photo: Dirk Rees / Hasselblad Masters 50
H4D Introduction The captured image is temporarily stored internally on a CF card or externally, via a FireWire connection onto a computer hard disk. When tethered to a computer you can control the camera using Phocus (see the separate Phocus manual for further details). As the H4D is a purely electronic device, attention to power supply is vital. When working untethered it is therefore important to plan battery loading / battery replacement to ensure continued workflow.
H4D A D H B E I C F J G K L M N O P Q H4D-31 / 40 / 50 R H4D-60 Parts, components & control panel buttons The buttons are used for browsing images and navigating the menu system to make settings. Two of the buttons, located at the bottom-right and -left of the screen, are given an on-screen label that changes according to the current context. For example, the Approval button sets the approval rating when browsing images, but becomes an OK button to confirm settings.
H4D Approval / (OK) button F Flash-card removal button L This button steps through the three approval levels, thereby assigning an approval status to the image currently displayed (or selected) in the preview screen. (part of the Instant Approval Architecture system). Also acts as a confirmation button (OK button) for some types of menu operations, such as deleting images; indicated by a label beside the button on the preview screen.
H4D Introductory overview of menu access, navigation and settings choice. The menu is structured in a manner similar to mobile/cell phones and similar small electronic devices. Various branches within the tree system are accessed by pressing the navigation button until you reach the point where a choice has to be made. The OK (Approve) button or SELECTION (ZOOM IN / ZOOM OUT) buttons are then used to confirm choice. Both the front and rear control wheels can also be used to navigate the menu.
H4D Schematic view of sensor unit menu Here you can see where all the screens are situated with regard to each other. Navigating to them is just a matter of tracing along the paths using the Navigation button. You can revert by either pressing the Navigation button in the opposite direction or the Menu/Exit button.
H4D MENU By using the buttons on the control panel and the control wheels on the grip you can navigate down through the various levels in the menu. Below is an overview of the setting options available. Simple description of menu items ISO WHITE BALANCE Sets the light sensitivity of the sensor. Sets the color temperature of light used. BROWSE Sets the IAA approval status (rating) filter for easier and quicker image browsing..
H4D 9 General sensor unit overview – initial settings This section deals with getting started as well as a general overview of tethered and untethered shooting and capture storage modes.
H4D Getting started The initial general setting is language choice. This choice is retained but can be changed at any time. You can choose between: 1 ENGLISH GERMAN FRENCH ITALIAN SPANISH JAPANESE CHINESE 2 Before each shoot an ISO and a white balance setting should be made (white balance is for your convenience regarding the appearance of the image on the display though; it will not affect the raw file. See next chapter for details).
H4D Capture storage The H4D can store captures in two ways: 1. Untethered / Compact flash card mode In this mode the H4D acts independently of other connections. Captures are stored on the internal, removable compact-flash card. • The main advantage with this mode is the freedom of cables and extra equipment. • The main disadvantages with this mode in the field are the battery power capacity and the size of the card’s holding capacity.
H4D 1 Using compact flash memory cards 2 When using a compact-flash card, the H4D is completely self- contained. No additional wires or connectors need to be attached. A The H4D is shipped with a 4GB (or larger) compact-flash card, which is capable of holding approximately 50 − 100 captures (according to model). Lossless compression is applied to the images, so the actual size of each capture can vary, thereby affecting the total number of shots you can fit on the card. B Inserting a card 3 4 1.
H4D Formatting The camera is only able to read and write to storage media that have been formatted. New cards or disks sometimes have no formatting, or you might want to convert media that are currently using a format that the camera cannot read. There are two ways to format cards. The quickest way is to use the Format card button on the grip. If you prefer, you can also use the menu on the sensor unit. Format button : Press the Format button on the camera grip.
H4D Tethered to a computer When tethered to a computer, you can control many camera functions using Phocus software. All captures are saved as 3F files (as opposed to 3FR files from a CF card) and can be immediately exported to other formats if desired. Connecting to a computer To connect to a computer, attach a FireWire cable from the FireWire port on a computer to the port on the side of the sensor unit. The port is protected behind a hinged cover.
H4D 10 Sensor unit – getting started This section covers basic initial settings: ISO, white balance and selection of media.
H4D 1 Settings check 2 ISO, White Balance and Browse settings should be checked before each session. They are therefore placed at the top level of the menu for quick and easy access. They are also shown on-screen in most preview modes, so you can easily keep an eye on them as your work. F ISO/WB ISO The ISO setting can be made using the ISO/WB button on the grip or on the sensor unit.
H4D 1 To set the white balance on the grip 1 The ISO/WB button provides immediate access to white balance settings. The rear control wheel is used to make the desired changes. The settings are automatically and simultaneously transferred from the camera to the sensor unit. Please note that the changes are only displayed on the sensor unit when the settings have been saved. R ISO/WB 3 1) Press the ISO/WB button on the grip.
H4D 3b 3b. Alternatively, you can position the central spot in the viewfinder over an area that you consider should be rendered as neutral in color in the image (a ‘grey card’ or even a sheet of white paper is ideal) and make a test capture (ensure the exposure is approximately correct otherwise you will get a warning message). A small rectangle appears on the display marking that parti cular area.
H4D 11 Browsing images This section is an overview of the various ways of browsing, zooming, sorting and viewing images.
H4D Basic image browsing The large, full-color display enables you to inspect your shots while you are still on-location. It offers full-screen previews, high- magnification zoom, two levels of thumbnails and analysis tools including a full histogram and camera settings. When you first turn on the camera, the display opens in standard browse mode, showing the last capture taken (if any) for the current batch. Likewise, after each new shot, the display shows a preview of the capture.
H4D You work your way deeper into the menu branching off the selected item (framed in blue) each time you press the – button to view media, batch, thumbnail view etc. Conversely, you work your way back out of the menu each time you press the + button. Zoomed – – – – – + + + + + | Normal view | 4-Thumbnail view | 9-Thumbnail view | Batch list | Media Thumbnail views Note When you browse using the navigator button, you will only see images from the current batch.
H4D 12 Preview Modes The preview can be set to various modes to show or hide technical information. It can be changed in seconds.
H4D Preview Modes Standard preview mode Full-screen preview mode Battery saver mode You can cycle through all the available preview modes by pressing the View-Mode button. Histogram mode Histogram and full details mode Preview Modes Choosing the Preview mode Use the View Mode button to cycle through the available preview modes which are: • Standard preview: Shows a preview image surrounded by a display of a few important settings. Note that the information covers some of the image.
H4D Standard Preview The Standard Preview display is the one shown when you first turn on the camera and is probably the view you will use most often. ISO setting White balance Current storage medium It shows a preview of your most recent capture and basic information about the settings. Furthermore, the display enables you to navigate the menu system and make camera settings; see Working with the Menus for .
H4D 4 Full Details Mode 4 In full-details mode, you can read a complete list of camera settings, plus see the histogram and, in the background, a darkened preview of the image. The camera-setting details are stored with the image, so you can refer to them using Phocus even after you have loaded the image to your computer and stored it in your archive.
H4D 13 IAA – Instant Approval Architecture IAA should be considered as a necessary part of your methods. It can help you browse efficiently and help in sorting before you download to a workstation.
H4D Using Instant Approval Architecture The Instant Approval Architecture system helps you to evaluate your images as quickly as you take them. It works by supplying immediate audio feedback, which tells you instantly whether each new capture is exposed correctly or likely to be rated as overor underexposed. Simultaneously, it applies a colored code to each capture as a visual reminder of its status. This status can be manually changed when browsing either immediately or later on.
H4D Note When the current storage medium is full, red-status images will be deleted (one at a time) to make room for new shots. You can continue shooting until no red-status images remain. If you then try to take additional captures, you will get a 'medium-full' message. 3. If no problem is detected, then the image is saved with the chosen default approval status. 4.
H4D Default approval status 1 By default, the system assigns an initial approval status for each new shot based on an analysis of the distribution of exposure levels. In the factory configuration, the status of each new shot is assigned as follows: • Green (approved): The new shot seems to have been exposed correctly. • Yellow / Amber (unclassified): 2 The new shot seems to have been over- or under-exposed.
H4D Browsing by approval status You can set the camera to browse by approval status, which means, for example, that you will see only green-status images as you browse a batch (or both green and yellow, or only red, etc.). The current filter setting is indicated on-screen, as illustrated. Filtered images are still there, but they will not be shown until you change the filter setting. Also, if you change the status of an image, the image may ‘disappear’ if it no longer passes the filter.
H4D 1 Deleting by approval status 2 There are several ways to delete images, including approval status. You can choose to delete: • All red-status images from the selected batch or medium • All red- and yellow-status images from the selected batch or medium • All images from the selected batch or medium 3 roceed as follows: B. C. 1. Starting at the single-image preview display, Select MAIN MENU > STORAGE > Delete. 2. Use to enter the Delete submenu or use shortcut. A. 3.
H4D 14 File storage – working with batches This section covers navigation of the menu regarding storage media, the storage of captures in batches, viewing batches as well as rating and browsing captures of using the IAA system.
H4D Introductory overview Navigating to batches and media. Zoomed – – – – – + + + + + | Normal view | 4-Thumbnail view | 9-Thumbnail view | Batch list | Creating new batches The BATCH screen. Batch name Date the batch was created The blue frame around a folder tells you that it is the Current Batch. Current batch capacity The MEDIA screen.
H4D Organizing work with batches 1 Collections of captures are stored in named and dated folders called batches. They help you to organize your shots as you work and function exactly as folders on a computer. Batches have the following properties: • When you create a new batch, you assign a name to it. • When you copy images from a compact-flash card, each batch is saved as a sub-folder on the destination disk.
H4D 1 Navigating batches 2 The camera always works with a current batch. This is the location at which the camera will save all new shots. To view batches using the browse controls: 1. Press the zoom-out ( ) button repeatedly until you are all the way at the top zoom level. Example: nine-thumbnail view 3 2. If you start with the single-image preview view, then you pass through the following views to get there: • Single-image preview • Four-thumbnail view • Nine-thumbnail view 4 3.
H4D 15 Deleting images Photo: Stephan Zirwes / Hasselblad Masters 84
H4D Menus for deleting single or several images from the current batch. Menus for deleting several images from a batch. Menus for deleting several images from all batches from a card.
H4D 1 Delete 2 The storage settings allow you to format media and create new batches. You can also set the initial approval status (green or yellow) assigned to new pictures. The first item on the storage list is file deletion. The great advantage of digital capture is of course the ability to judge images on the spot, delete them immediately if necessary and thereby make room for more valuable captures.
H4D 1 Deleting several images from a batch 2 To delete several images from a selected batch: 1. Starting at the single-image preview display, Select MAIN MENU > STORAGE > Delete. 2. Use to enter the Delete submenu or use shortcut. 3. Use the – or + button to select: A. This image - deletes the current image only B. All red in batch - deletes all red images in the current batch C. All yellow/red in batch - deletes all yellow and red images in the current batch D.
H4D 3. Press to open the Delete Image dialog. 3 4. You must now select the approval status that you wish to delete. All images on the CF card that are also of the status that you select here will be deleted by the operation. Use and to select All Red, All Red & Yellow or All. 5. Then press to open the delete dialog for the selected status. You are now asked to confirm the delete. 4 6. • To confirm, press the + button to change the status to Yes and then press the OK button to execute the delete.
H4D 16 Settings This section covers various diverse settings such as sound, date & time, display brightness, etc.
H4D Navigating the USER INTERFACE settings User Interface By altering the User Interface settings, you can control the way the sensor unit interacts to suit you and your preferred way of working. It also includes date and time settings. User interface menu items The user interface menu includes both items and sub-menus as follows: • Language: The menu system can be displayed in any of seven languages. This menu item enables you to select your preferred language for the menus.
H4D • Sound: The H4D uses audio feedback to help let you know if each new image is exposed correctly. This is described in Standard Instant Approval Workflow. This menu item has Volume (choose between High, Low and Off), Key Click (choose between On and Off) and Exposure Warning (choose between On and Off). • Date & Time: The H4D has an internal clock that keeps track of the date and time. This information is used to mark each shot with the date and time at which it was taken.
H4D Camera 1 The Camera setting automatically corresponds to an H4D body in normal use. However, when the sensor unit is attached to a large format/view camera then other settings must be manually made. See separate section for further information . About Hasselblad regularly releases updates to the firmware of the sensor unit. These updates not only improve the efficiency but also often add new features.
H4D Custom Options 1 Selecting an option Proceed as follows: 1. Press MENU and navigate down to select SETTINGS. 2. Press the button and navigate down to Custom Options. 3. Press the button to select the option. Choices are selected by the + or – buttons. 2 • Tilt sensor The tilt sensor sets the viewing orientation of captures when they appear in Phocus.
H4D 17 Sensor unit – use with view cameras This section covers using the sensor unit when attached to a view or large format camera.
H4D View cameras – Flash sync shutters View cameras – Electronic shutters Flash sync input cable Any view camera with Hasselblad H adapter Any view camera with Hasselblad H adapter Rollei LensControl S Expose cable Flash sync input cable Host computer with FireWire, running Phocus Schneider Rollei LensShutter Control S Control ES Navigating the CAMERA settings Host computer with FireWire, running Phocus Schneider electronic shutter control Use with view / large format cameras For optimum use, th
H4D 1 Setting CAMERA model and options 2 These settings are only available when the sensor unit is not attached to an H4D body. Proceed as follows: 1. Press the menu (MENU) button to open the menu. 2. Use and to select the SETTINGS sub-menu. 3 3. Press to open the SETTINGS menu. 4 4. Use and to select CAMERA. 5. Press to open the CAMERA menu. 6. Press either the + or – button to select camera model. 5 7. Use and to select EXPOSURE TIME or CAPTURE SEQ. if required. 6 8.
H4D 1 Setting EXPOSURE TIME and CAPTURE SEQUENCE 2 Proceed as follows: 1. Press the menu (MENU) button to open the menu. 2. Use and to select the SETTINGS sub-menu. 3 3. Press to open the SETTINGS menu. 4 4. Use and to select CAMERA. 5 5. Press to open the CAMERA menu. 6 6. Press either the + or – button to select PINHOLE. 7 7. Press or to select EXPOSURE TIME. 8 8. Press either + or – to make an exposure time setting. 9 9. Press to select CAPTURE SEQUENCE. 10 10.
H4D 11 11. Press either the or button to make an INITIAL DELAY setting. This setting controls the amount of time that elapses before the first capture in the sequence. 12 12. Press to select DELAY. 13 13. Press either + or – to make a DELAY setting. This setting controls the amount of time between each capture in the sequence. 14 14. Press to select COUNT. 15 15. Press either + or – to make a COUNT setting. This setting controls the number of captures in the sequence. 16 16.
H4D 18 Custom settings – controls and displays This section describes the features that can be exploited to obtain the optimum in customized workflow. The custom options are designed to work for you in the background, ensuring security and also helping to bring down the barriers between you and capturing the image. Each one can be changed to suit your preferences so that the whole camera becomes a reflection of the way you like to work.
H4D General overview of camera menu MENU Text setting Self timer options Bracketing options Interval options Custom Options Settings options System status 100 Drive
H4D Menu charts – general Throughout this manual you will find charts to explain the steps and procedures required to alter the various settings. These charts are laid out to graphically illustrate in a simple manner how to navigate through the menus. While they include all the information that would be presented on the display relevant to that section, they cannot illustrate all the possible combinations of the various symbols seen on a screen at one time as that would be impractical and too confusing.
H4D There are a number of more advanced features that while not necessarily used every day still remain immediately accessible through the menu system. They provide the integral finesses that make the H4D a powerful and sophisticated tool to satisfy a variety of professional demands. There are five main functions: Self timer, Bracketing, Interval timer, Settings and Drive. An important point to remember is that certain options are only available when the relevant screen has been accessed.
H4D 1 Self timer setting 2 F MENU The Self timer function is set in the following manner: 1) 2) 3) 4) Press the MENU button on the grip. Turn the front control wheel until Self Timer appears. Press ENTER (ISO/WB button) on the grip. Turn the front control wheel to access the options, that are: Delay 3 4 ISO/WB Mirror sequence F Mirror Up / Mirror Goes Down Enter 5 (A drop shadow will be displayed beneath the selected symbol, for example ) 6 R R ‘Delay’ highlighted with drop shadow.
H4D 2 Bracketing options available 2 frames or 3 frames or 5 frames options available options available 1/3 EV or 1/2 EV or 1 EV or 2 EV or 3 EV Tip A bracketing sequence can be stopped mid-sequence by pressing the ESC (ON.OFF) button. Tip Check the lower text-row on the screen for ON or OFF status.
H4D 1 Bracketing setting 2 F MENU The Bracketing function is set in the following manner: 1) Press the MENU button.
H4D 3 Interval options available 2 frames – 255 frames options available 1 second − 1 hour 1 3 2 F MENU Interval By using the interval setting, you can allow the camera to take a series of captures automatically over a set period. This is often required for time and motion studies, security surveillance, n ature study, etc. The exposure and focus settings (Manual or Auto) will be according to the camera settings at the time of capture.
H4D 4 Settings / 4.1 Custom Options options available 1 4 2 F MENU CUSTOM OPTIONS Settings From the Settings screen you can access four main sub-settings: Custom options, Image info, Date & Time and System status by turning the front control wheel. From each of these sub- settings you can access further items for setting changes. Look at the main menu chart to get an idea of where all the options are on the menu tree. 4.
H4D 4.1 Custom options Stop down button function • Stop Down The following is a description of all 34 Custom Options. They are accessed by Menu > Settings > Custom Options. The words and figures in red signify the default setting for that option. Standby timeout 6 but can be reassigned to: 1 • 10s • 5s • 15s • 30s Determines the amount of time the camera remains active before it automatically reverts to standby mode (indicated on the grip display by the H4D logo). Minimizes battery consumption.
H4D Magazine exposure lock Spot mode 10 14 • No • Yes • Normal • Zone Allows you to release the lens and auxiliary shutter in camera body without a sensor unit attached. Determines how the camera behaves when set to Spot Mode. Yes blocks the lens shutter and auxiliary shutter in camera body if the sensor unit is not attached. Generates message on grip display if attempted. No allows the lens shutter and auxiliary shutter in camera body to be released without the sensor unit attached.
H4D Rear wheel quick adjust Interval & Self Timer 17 21 • Yes • No • Exit • Stay Allows rear control wheel to make a rapid EV adjustment (or EV compensation) in auto-exposure mode. Allows either the Interval or Self Timer mode to remain active after a capture or immediately return to standard setting. Yes turns the setting on. By turning the rear control wheel, the adjustment is made and appears on both displays as a ± symbol between the shutter speed and aperture values.
H4D Aperture control in Manual 26 True Focus in AF-S 31 • Front wheel • Rear wheel • Off • on Selects which control wheel changes the aperture setting when in Manual exposure mode. Re-assigns half press of shutter release button to activate True Focus function instead of standard automatic focus (single) Front wheel selects the front control wheel to change the aperture setting. Always return mirror Rear wheel selects the rear control wheel to change the aperture setting.
H4D Customizable button function list The TRUE FOCUS, AE-L, STOP DOWN and M.UP buttons can all be reassigned to different functions. Default settings are as according to name. None Flash Measure The button has no function. Initiates flash measure function. True Focus Interval timer Activates True Focus function. Initiates interval timer function. AF Drive Cycle LM mode Activates the AF system in any focusing mode.
H4D 4.2 Image Info 1 2 4.2 Image Info F MENU In Image info you can compose your own combination of letters, words, symbols, etc to be included in the metadata. The same procedure is also used to change a Profile name. Text setting 3 ISO/WB 4 F Enter 5 ISO/WB Enter 7 ISO/WB Enter 6 1) 2) 3) 4) 5) Press the MENU button on the grip. Turn the front control wheel until Settings appears. Press Enter (ISO/WB button) on the grip. Turn the front control wheel to access 4.2 Image info.
H4D 1 2 3 4 5 6 7 8 Changing text - an example Here is an example of how to change existing text (in this case the word ‘Text’ to a copyright symbol plus a photographer’s name -’Jens Karlsson’). See previous section ‘4.2 Image info' for procedure description. 1) Start by accessing the Image info screen. On the text row towards the bottom of the screen, the text line cursor is automatically placed to the right of the character that is to be changed.
H4D 4.4 System status 1 4.4 System status 2 F MENU Check component usage and general servicing information as follows: 1) Press the MENU button on the grip. 2) Turn the front control wheel until Settings appears. 3) Press the Enter (ISO/WB button) on the grip. 3 ISO/WB 4 F Enter 5 ISO/WB Enter 7 ISO/WB Enter 4) Turn the front control wheel to access System Status. 5) Press the Enter (ISO/WB button).
H4D 5 Drive 1 Drive 2 There are two drive modes: Single and Continuous. F MENU Single and Continuous In Single mode, a capture is made when the shutter release utton is pressed and the camera is made ready for the next b capture. To make the next capture however, you must first release the shutter release button and then press again.
H4D 18 Flash / Strobe – controls and displays Sync at all shutter speeds to 1/800s Integral fill-flash SCA 3002 compatible Flash measure capability Rear sync capability The H system meets professional demands for a variety of situations where flash is required. It includes an integral flash primarily intended for fill-flash use but strong enough for simple close work.
H4D The H4D can be used together with most flash units in manual mode. However, to make use of a TTL automatic function, you must ensure the flash unit is compatible with the SCA 3002 system. Connection is either by the PC socket or by the hot shoe (see warning note below). The viewfinder houses an integral fill-flash with a guide number of 12 and features OTF/ TTL flash control.
H4D To access the controls: 1 2 F FLASH AF Clr 3 4 R 5 Example of viewfinder display showing Flash set to Rear sync as well as '- 1EV' exposure compensation. 1 1) Activate the camera and press the FLASH button once. 2) Turn the front control wheel to set the amount of compensation required: • from +3EV through -3EV • press Clr (AF button) to clear the setting quickly if required.
H4D 5) If the settings were incorrect to match the output of the flash unit, the viewfinder display shows a red triangle alongside a flashing green ‘flash’ symbol plus a warning message - ‘Low flash’. The grip display will also show a warning message ‘Low flash’. Conventional measures should then be taken to correct the situation. (That is: move closer to the main subject, use a larger aperture setting or use a higher ISO setting).
H4D 20 Multi Shot This section provides an overview of the H4D50MS model.
H4D Multi-shot The H4D multi-shot capability is available with the H4D-50MS product. Multi-shot provides a capture mode where four separate images are saved that are captures of the same object with the sensor offset by one pixel between the shots. The resulting image shows ultimate color definition and eliminates unwanted moiré and artefacts in studio type stills photography. To make a multi-shot capture, you must work tethered to a computer and have the Hasselblad software Phocus running.
H4D 20 Optional Accessories HTS 1.5 HVM waist level viewfinder Proshade V/H 60 – 95 GIL Tripod quick coupling Flash adapter Filters Support strap H Camera strap H Focusing screens Release cord Lens accessories Optional accessories provide the opportunity to extend the capabilities of your system or just to add extra convenience to suit your way of working.
H4D HVM waist level viewfinder Tripod quick coupling H (3053328) (3043326) The HVM waist level viewfinder allows a comfortable lower viewing angle either for effect or where eye contact with the subject is desirable in portrait photo graphy, for example. Autofocus function of all lenses fully retained. Optimized for horizontal format shooting and not suitable for vertical format use. Mounted on a tripod, this accessory facilitates rapid attachment and removal of the camera.
H4D HVD 90x / HV 90x & 90x-ll viewfinders Release cord H (3043370) Remote release cord with a cable length of 0.5 m. (3053330, 3053326, 3053334) 90 degrees reflex viewfinder, providing 100% field of view even when wearing eyeglasses. Includes built-in fill flash and multi-mode light metering system. Focusing screens All focusing screens are of the Spherical Acute-Matte D type with or without grid and central markings for spot (ø 7.5) and AF metering area.
H4D HC lens range HCD 4/28 mm HC 3.5/35 mm HC 3.5/50-II mm HC 2.8/80 mm HC 2.2/100 mm HC Macro 4/120-II mm HC 3.2/150 mm HC 4/210 mm HC 4.5/300 mm HC 3.5–4.5/50–110 mm HC 4.0–5.
H4D Connectivity diagram Optional viewfinders Tilt/Shift HV 90x / HVD 90x viewfinders HTS 1.5.
H4D 21 Appendix P and Pv explanatory charts Technical specifications Problems, Equipment Care & Service This section provides an insight into the more technical aspects as well as some important reference information.
H4D True exposure Shutter position T3 = T1 Open Exposure at max aperture (e.g. f/2,8) Exposure at aperture f/4 Exposure at aperture f/4 adjusted with true exposure Closed T1 T2 Time True exposure Note When using flash/strobe as the main light source and using the 1/800s shutter speed, you should turn off the True Exposure facility (Custom Option #13). Failure to do so will cause underexposure. You can download a full explanation of this situation from www. hasselblad.com.
H4D Automatic exposure – P & Pv Mode P Mode EV -5 -4 Pv Mode 35 50 50-110 @ 50 35 50 50-110 @ 50 80 120 50-110 @ 110 80 120 50-110 @ 110 210 150 210 150 -3 -2 -1 1 0 2 3 4 5 6 7 8 9 10 1.
H4D Technical specifications Camera Type Auto-focus, auto-exposure digital SLR camera with interchangeable viewfinders and lenses. Construction One piece stainless steel shell. Die-cast aluminium internal structure. Tripod sockets (1/4 and 3/8”) and quick coupling tripod plate for rapid mounting. Lenses Hasselblad HC/HCD lenses with built-in electronically controlled shutter and aperture. Automatic or manual focusing with instant manual focus override.
H4D SENSOR UNIT H4D-60 H4D-50MS H4D-50 Sensor size 60.1 Mpixels: (6708 x 8956 pixels). 50 Mpixels: (6132 x 8176 pixels). 50 Mpixels: (6132 x 8176 pixels). Sensor dimensions 40.2 x 53.7 mm. 36.7 x 49.1 mm. 36.7 x 49.1 mm. Image size Raw 3FR capture. Compressed to 80 MB on average. 8 bit TIFF: 180MB. Raw 3FR capture. Compressed to 65 MB on average. 8 bit TIFF: 150MB. Raw 3FR capture. Compressed to 65 MB on average. 8 bit TIFF: 150MB. Capture rate 1.4 seconds per capture.
H4D SENSOR UNIT H4D-40 H4D-31 Sensor size 40 Mpixels: (7304 x 5478 pixels) 31 Mpixels: (4872 x 6496 pixels) Sensor dimensions 33.1 x 44.2 mm. 33.1 x 44.2 mm. Image size Raw 3FR capture 50 MB on average. 8 bit TIFF: 120MB. Raw 3FR capture 40 MB on average. 8 bit TIFF: 93 MB. Capture rate 1.1 seconds per capture. 50 captures per minute. 1.2 seconds per capture. 42 captures per minute. Storage capacity 4 GB CF card holds 75 images on average. 4 GB CF card holds 100 images on average.
H4D Default Settings ('Default' profile) Exp.mode LM mode Exp. adjust Focus mode Drive mode Flash sync Flash adjust Self timer Bracketing Interval timer Custom options A (Aperture priority) Centre weighted 0 AF-S S Normal (beginning of exp.
H4D Care and maintenance of sensor unit 1 Handling and storage • Always replace the protective CCD/filter cover when the sensor unit is not mounted on the camera. • Do not touch the exposed CCD/filter with your fingers. • Keep all foreign objects out of the camera opening. • Store the sensor unit away from moisture and excessive heat. • Protect the sensor unit from impact–do not drop it.
H4D Cleaning using the HAMA cleaning fluid and tissues Note! Hasselblad recommends HAMA Optic Cleaning Fluid 5902. Note Do not use same side of the e-wipe twice as you will be likely to reapply any particles removed in the first pass. 1. Carefully spray the fluid onto the IR filter at a distance of 10-15 cm (4-5 inches), so that the fluid is applied onto the filter as a thin, even haze. 1-2 sprays are enough. If you apply too little, the fluid will start to dry up before you start wiping the filter.
H4D SERVICE Problems, Equipment Care & Service The H4D is a very sophisticated camera that relies on much information b eing passed and processed to and from each modular unit to produce the correct behavior. It is therefore essential that reasonable care is taken in a ttaching, detaching and storing the viewfinder, lenses, extension tubes, etc to ensure that the databus connections are not damaged or soiled in any way.
H4D Q U I C K I N D E X A E About Accessories Accessor y connec tion AE-L but ton Appendix 92 123 28 44 S Eyepiece adjustment 30 Exposure compensation/Quick Adjust 46 Sensor unit (intro) 42 Self timer 102 Set tings (Custom Options on grip) 107 File storage 80 F 128 77 Flash Audio feedback 21 Focus assist 33 Format ting 61 35 Automatic exposure mode 43 G Base plate 28 I Batches 82 Infrared focus set tings Bat ter y 24 Instant Approval Architec ture Grip display 104 Bro
H4D The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Victor Hasselblad AB & Hasselblad A/S. The images in this manual were not taken with a Hasselblad H4D. They are used for illustrative purposes only and are not intended to represent the image quality produced by a Hasselblad H4D.
H4D Hasselblad A/S Hejrevej 30, DK - 2400 Copenhagen, Denmark Victor Hasselblad AB Box 220, SE - 401 23 Göteborg, Sweden 12.
