User Manual (Manual (V1/English) for camera firmware version 9.1.0 or later.
C O N T E N T S Introduction Parts & Components Quick Start 3 6 7 Function Control & Display 13 Grip LCD 15 View f inder LCD 17 Change down but ton 34 Autofocus 52 Func tion selec tor 34 Single Shot 52 Film plane index 35 Continuous 53 Dark slide indicator 35 Autofocus mode 53 Dark slide key 35 Drive 54 Film tab holder 35 Single 54 Film holder key 35 Continuous 54 Magazine set tings lock 35 Multi exposure 54 Databus inter face 35 Prof iles 55 Camera Body 22 Mag
Congratulations! Welcome to the flagship of the H System. The H2 builds on the H1, adding the ability to utilize the latest advancements in digital backs, increased mobility, integrated power, and improved image quality. The H2 is the most advanced digital or film medium format photography platform on the market today, and a worthy addition to the famed Hasselblad line. The specifications and capabilities of the H system exceed the demands of most photographers. This allows the system to expand and develop.
name, symbols, etc., immediate cable-free compatibility with digital backs, presentation of digital information such as histograms and grey balance on the LCD, extremely accurate electronic leaf shutter, flash sync at all shutter speeds to 1/800s, eyeline viewfinder with 100% view, dot matrix viewfinder LCD, lithium or rechargeable battery options, shutter speeds from 18 hours to 1/800s, user customization of functions.
What’s in the box Your new Hasselblad camera may have been supplied in kit form or as separate items. There are a number of possible combinations depending on factors such as offers, bundles etc. Please ensure that all the items noted on the accompanying packing information have been supplied and are correct. Contact your Hasselblad dealer or distributor immediately if anything is missing or seems faulty in any way, quoting the serial numbers and purchase details where appropriate.
1. Flash unit hot-shoe 2. Rubber eyecup 3. Exposure mode and metering method selector button 4. Exposure compensation button 5. Eyepiece adjustment dial 6. Magazine LCD 7. Magazine LCD illumination button 8. Magazine control buttons 9. Magazine settings lock 10. AE-L button 11. Film wind-off button 12. User button 13. Rear control wheel 14. Grip LCD 15. Support strap lug 16. Camera control buttons 17. Magazine databus 18. Front control wheel 19. Shutter release button 20. Battery holder button 21.
1 Quick Start This section is a quick start guide to assembling and preparing your new. From separate items, the assembly process should take no more than several minutes to complete and you will be able to take simple and straightforward photographs immediately. You can, of course, skip the sections on loading film if you wish to just assemble the camera to begin with or when using a digital back immediately.
H2-Kit only / H2- Separate items 2 1 If your new H2 was supplied in kit form, you will only need to insert the camera batteries to make it useable immediately. After completing steps 1- 4, you can go straight to 6-7 and 9-10 (marked in red) and then directly to the section after step 17 to activate the camera. (Please note: if you want to use a rechargeable battery pack immediately, please see separate instructions under the ‘Camera Body’ heading for use and then go straight to step 4).
13 14 15 16 13. Rest the magazine retention groove on the magazine support on the camera body ensuring that they are correctly positioned. 14. Swing the magazine towards the camera body and firmly press into place with a click. If there is resistance, the magazine retaining hook has probably been inadvertently released. Push the magazine retaining latch to the right and inwards simultaneously again to reset it. 15. Remove the top protective cover from the viewfinder screen location by lifting a corner.
23 24 23. Pull 8–10 cm (3–4 in) of paper backing from the film roll and insert the tongue of the backing paper into the slot in the take-up spool. 24. Turn the take-up spool one complete turn to ensure the tongue is firmly held in place by the overlying paper backing. Check diagram for correct film travel direction. 25 26 25. Re-insert the film holder into the main body of the film magazine ensuring the correct orientation.
33 34 35 36 33. From the inactive mode, press the ON.OFF button until you see the H2 logo on the grip LCD. The LCD then in turn displays the ‘main’ screen. If the camera is already in ‘standby’ mode (the H2 logo will be visible on the grip LCD) click on either the shutter release button or the ON.OFF button to activate it again. (Note that a ‘click’ action is a quick press.
Familiarize yourself with the H2 Take a few minutes to familiarize yourself with the H2 and its various controls. Note the difference between a long press, a short press and a ’click’ with some buttons. For example from the main screen a click of the ON.OFF button will take you to Profiles while a longer press will turn the camera off. With your right hand holding the ergonomic grip for security and control, your thumb and fingers have immediate access to all the controls without letting go.
2 Function Control & Display ■ LCD and LED displays on camera and viewfinder ■ Pixel based display ■ Upgradeable firmware ■ Rapidly accessible menu ■ Interactive display ■ Customizable functions All functions and settings on the H2 are accessed and altered by the control buttons and wheels on and around the grip aided visually by the LCD userinterface. The information on the LCD is in menu format and has a great deal in common with those found in modern computers, cell phones, etc.
Below is an overview of the primary functions of the control wheels and buttons. Some controls have dual or triple functions according to the state of the menu or setting. A full description can be found further on in this manual. Shutter release button Activates camera and releases shutter. Front control wheel Accesses and changes various settings. FLASH / (CONTROL LOCK) button Lock settings to avoid inadvertent change. Also accesses flash settings. MENU button Accesses menu.
Grip LCD Typical camera grip display. (The information in brackets describes this particular example). Flash condition indication (No exposure compensation, normal flash synchronisation) Focus setting (Autofocus setting, single shot mode) Drive condition (Single setting) Shutter speed setting (1/20s) Aperture setting (f/5.6) Film speed rating (160 ISO/ASA) Exposure Value display (EV 9.
The basic principle behind making changes is that the appropriate button is first pressed to access the menu and then settings altered by way of the control wheels. The appropriate control wheel is designated by arrowheads alongside the setting description. Some buttons have a toggle function, the ON.OFF button has a quick ‘click’ action as well as a longer (half-second) ‘press’ action and the shutter release has two positions: ‘half-press’ and ‘full-press’.
Viewfinder LCD Typical viewfinder display. Note the LEDs will only be visible when activated (by the camera or a setting). (The information in brackets describes this particular example). Exposure method indication (‘aperture priority’ mode) Aperture setting (f/4.8) Exposure compensation setting reminder symbol Flash LED Warning triangle LED Metering method setting (Average) Focus Aid LED Exposure compensation setting Shutter speed setting (0.4 second) (+0.
Menu charts – general The H2 features the advantage of multiple customization of settings. This means that your personal choice of settings, and thereby appearance of various combinations of symbols on the LCD at any time, will not necessarily be the same as many of the screens illustrated in this manual. Throughout this manual you will find charts to explain the steps and procedures required to alter the various settings.
Shutter release button A A This button has half-press and full-press positions. By pressing half-way (or softly) the camera, auto focus function and exposure meter can be activated. By pressing all the way down (or more firmly) the shutter will be released (or the chosen exposure procedure will begin, as relevant. For example, the self timer is activated with this button) FLASH / (CONTROL LOCK) button / (EXIT) B This is a triple function button.
On the rear of the grip, as well as the rear control wheel, there are a further three control buttons: AE-L button J K L J This button can lock a light reading made in both automatic and manual exposure modes. It can also be used in Zone mode to take a new reading. Can be reassigned in Custom Settings to another function. See section on the AE-L button (chapter 8, Light Metering and Exposure Control) for full details.
There are also two control buttons on the viewfinder, as well as the eyesight correction adjustment wheel: Eyesight correction adjustment wheel P The personal eyesight adjustment facility has a diopter range of -4 – +2.5, to suit most users. EV correction adjustment button Q Press this button to access the EV compensation screen. Settings are made with either the front or rear control wheels. An EV correction symbol appears on the grip and viewfinder LCD as confirmation.
3 Camera Body ■ Aluminium cast in one piece ■ Stainless steel shell ■ Integral Quick coupling plate ■ Digitally controlled ■ Upgradeable software ■ Modular design ■ Integral ergonomic grip ■ Pixel based LCD user interface The H2 camera body is a robust construction of cast aluminium with a stainless steel shell for extreme durability. The workings of the camera are controlled by silicon technology that provides tremendous opportunities for sophisticated operation.
1 Carrying strap 2 1, 2 The carrying strap is attached by firstly withdrawing the safety collar. The hook is then freed and attached to the strap lug (fig. 1). Slide back the safety collar (fig. 2) to ensure the hook remains in the locked position. The collar is purposely a tight fit and might need some effort to slide. Batteries 4 3 The H2 requires batteries for all actions.
The battery charger 1 1, 2 The battery charger unit is supplied with five plug attachments to suit various types of domestic electrical sockets available worldwide. Other types of socket will require a domestic socket converter. Attach the chosen plug (fig 2, A) by sliding into position, ensuring that the two electrical contact prongs on the charger correctly enter the two contact sockets on the plug attachment. Removal is by the reverse procedure.
• • • Long-term storage of batteries with very low charge is not recommended. The battery has a limited life and its performance is gradually reduced over time. It is advisable to follow the recommendations and precautions in this manual for product performance and safety reasons. Rechargeable battery grip – precautions The following precautions should be adhered to: Battery grip rechargeable 7.2 V: • Connect the battery grip to the camera correctly. • Keep the protective cover in place when not in use.
Accessory connection 11 12 11, 12 On the left hand side of the camera body are two accessory retaining screw threads (M5), as well as a databus connector, protected beneath a cover. The screw threads are a future-safe design feature for new products while the connector is for service only at this point in development. The cover can be removed by inserting a pointed object, such as a pen, in the small hole and then sliding it to the left, as in the illustration.
4 Viewfinder ■ Multi-mode light metering ■ Full exposure information ■ 100% image ■ 90° viewing angle for eye-line composition ■ Full image for spectacle wearers ■ Integral dioptre adjustment ■ Integral flash unit The 90° viewfinder provides a laterally corrected 100% image at eye-line level. It features a wide-range diopter adjustment to suit most users. The viewing distance is designed to provide full frame view even for eyeglass wearers.
A B C D E F G H Parts & Components A. B. C. D. 1 2 Rubber eye cup Hot shoe Eyesight adjustment wheel Exposure compensation button E. F. G. H.
5 Lenses ■ Rapid and accurate automatic focusing capability ■ Central electronic shutter ■ Instant manual focus override with natural friction ■ Instant automatic-focus return capability ■ Non-rotation of filter or accessory when focusing ■ Non-rotation of lens barrel in automatic focusing mode ■ Shutter speeds 18 hours to 1/800 sec with film ■ Reversed lens shade serves as protection ■ Automatic detection of extension rings and converters All HC lenses have been specially formulated for the H system to prod
1 Parts and components 2 A A. B. C. D. E. B C 2 D E 3 Lens shade index Manual focus ring Focusing distance scales Depth-of-field scales Lens index Attaching a lens 1 1 2, 3 Remove the front protective cover on the camera body by depressing the lens release button and keeping it depressed while turning the cover counter-clockwise. Remove the rear lens cap by unscrewing it in a counter-clockwise direction.
Depth-of-field calculation 7 There are two distance scales (in feet and metres) visible through the focus distance window on the upper part of the lens barrel. There is also a central lens index mark and a depth-of-field scale. The focusing distance is read off the chosen scale from the central lens index. Depth-of-field can be calculated as follows: 1. Focus the lens as required. 2. Make an exposure reading (auto or manual) and note the aperture setting. 3.
is incorrect if only one arrowhead is visible. If the focus cannot be established, then both arrowheads flash. CF Adapter The CF adapter is an optional accessory that allows virtually all C type lenses from the V-system to be used on H-system camera bodies. This automatically expands the potential lens range for H cameras by more than a dozen different focal lengths. The automatic focusing system in the H camera can be used as a guide for manual focus setting.
6 Film Magazines ■ Automatic 120/220 compatibility ■ Automatic wind on / wind off ■ Automatic film advance ■ LCD information panel ■ Integral dark slide ■ Customizable data imprinting ■ Illuminated LCD ■ Barcode recognition ■ Count-up or count-down film frame reminder choice The film magazine is a sophisticated semi-independent unit within the modular system. It has its own power supply for individual information storage, LCD panel, illumination, etc.
A F G H B J I K L C D E Parts and components A. B. C. D. E. F. LCD panel LCD illumination button Change up button Change down button Function selector Film plane index LCD panel A A B The LCD can be illuminated by pressing the display illumination button, which is accessible when the magazine is not attached to the camera. The LCD will remain illuminated all the time you keep the button depressed, up to a maximum of 10 seconds.
G a time-out of five seconds of non-activity, the display returns to the main screen. Changes can only be made when the settings lock switch is in the unlocked position. H Film plane index F Provides a measuring point for the actual position of the film plane in the magazine. Used for calculations in critical applications.
Operation Battery The magazine uses a battery to retain information and settings when unattached from the camera. When attached to the camera body, the magazine takes its power requirements from the camera batteries. The magazine battery will normally be effective for 1-2 years depending on use (off camera illumination, for example). When the battery is in a very low condition, (approx... 1 month of use left), a low-battery symbol appears on the magazine LCD as a warning.
Magazine settings Press the function selector ( button ) repeatedly to successively access: A. Film speed (ISO / Bar Code) B. Film length (120/220/ Number of frames) C. Data (on/off ) D. Frame counter (count down / count up) E. Low-battery warning symbol C A B D Film speed setting / Barcode E 1 2 3 4 The film speed (ISO / ASA) can be set automatically or manually. Automatic setting uses a Barcode (only some films have this feature). This is the default setting.
Data imprint setting Data imprinting can be activated or deactivated through the magazine menu. Manual film speed setting. 220 film length setting. Data imprinting setting. ‘Frames remaining’ counter setting. To access data setting: 1) Ensure the magazine settings lock is in the unlocked position. 2) Press the button until the Data symbol appears. 3) Press either the or the button to reach On or Off. 4) The new setting will be saved automatically after a time out of five seconds.
Film loading 1 The film magazine can be loaded either on or off the camera. Regularly check the interior of the magazine and remove dust, particles or any scraps of paper from previous rolls of film. Load and unload film magazines away from direct light sources. 1) Fold out the film holder key and turn it counter-clockwise 90°. Withdraw the film holder completely.
7 Digital Photography ■ Excellent compatibility with both Hasselblad and thirdparty backs ■ Information visible on camera LCD ■ Tethered and untethered solutions for maximum flexibility The H system cameras were designed with digital photography in mind right from the outset so a digital back is not just an extremely useful accessory but is rather an integral part of the initial H system modular concept. This paves the way for seamless integration and consequently increased efficiency and improved workflow.
Hasselblad provides a number of digital solutions, both integral and as third-party combinations. This provision extends even beyond the medium format and thereby creates the most comprehensive range of digital solutions for high end photography. The H2 offers a versatile platform for both analogue and digital work. However, digital integration is a fundament of the H system concept resulting in much more efficiency.
Three modes of operation and storage Optimum portability and image storage are critical for the professional photographer. The Ixpress CFH offers a free choice of the portable CF card storage, the flexible FireWire drive, or tethered operation with extended, special capture controls. With these three operating and storage options, the photographer is able to select a mode to suit the nature of the work in hand, whether in the studio or on location.
Approval Architecture (IAA), an enhanced set of feedback tools, designed to liberate the photographer to focus on the shoot rather than the selection process. IAA triggers audible and visible signals for each image captured, telling the photographer immediately whether the image has a red, yellow or green light status. The information is recorded both in the file and in the file name, providing a quick and easy way to classify and select images, in the field or in the lab.
8 Light Metering & Exposure Control ■ Three metering methods ■ Five exposure methods ■ Extremely accurate light metering The light metering system is capable of selective sensitivity producing three reflective metering methods: Average, Centre weighted and Spot. All methods are measured in increments of 1/12 EV. Information transfer is rapid and automatic ensuring consistently correct exposure settings even in difficult and changeable lighting situations.
Light metering and exposure control Two primary factors have to be considered when making exposure control choice, namely, metering method and exposure method: Metering method determines in which manner the light measurement is made and how much of the image is taken into account( Average, Centre Weighted and Spot). Exposure method involves the parameters and deciding factors about how the light measurement is translated into aperture and shutter speeds.
1 Selecting metering method 2 Proceed as follows with the camera in active mode: 1. Press the EXP button on the viewfinder. 2. Turn the rear control wheel (in either direction 2a) to successively access the three choices: Average, Centre Weighted, and Spot 2b. 3. Press Save (DRIVE button) to retain the setting. EXP � 3 Exposure method Exposure can be controlled either manually or by using one of four automatic modes.
A ‘+ 0.3’ above the scale in the display, as in illustration 4 for example, would indicate a ‘0.3 EV overexposure’ setting. Conversely, a ‘-2’ , for example, would indicate a ‘2EV underexposure’ setting. Note that the appearance of a +/- symbol on the grip and viewfinder LCDs in manual mode means that a change has been made to the exposure compensation setting. See later section on ‘Exposure compensation’.
AE- L button 1 1, 2 This button has two main functions that can be incorporated in various working methods involving exposure locking. It also has an extra function for the flash meter capability (see AE-L section under Flash). The AE-L button can: 2 a) lock an EV setting in manual and automatic modes. b) be used as a brightness range checking facility in standard terminology or Zone System terminology.
Alternatively, you can also pre-set the initial zone reading in order to save time and effort where there is no freely available ‘zone 5’ subject for light measuring. For example, you might be on a sandy beach where you know that sand is normally classified as zone 6. You can pre-programme the zone placement by holding down the AE-L button while choosing the new zone value and turning the front control wheel until zone 6 appears.
9 General Functions ■ Manual and autofocus modes ■ Three drive modes ■ Quick adjust wheel ■ Profiles This section describes the basic and general functions used in most situations. By understanding the capabilities of the H system you will be able to gain a great deal of control of how you work in the future. By taking advantage of the many features available, you might well find your normal practices changing for the better.
Power The camera can be set at two active power modes − ON or Standby − as well as OFF. In active modes, battery consumption is least in Standby mode and most in ON mode. The camera enters Standby mode automatically after 10 seconds (default) to preserve battery consumption but this interval can be changed in Custom Options. Settings can only be made when the camera is in the ON mode. ON To activate the camera press the red ON.OFF button until you see the start-up H2 logo appear on the grip LCD.
Manual focus mode 1 The Manual focus mode is set by the front control wheel on the grip in the following manner: In camera active mode: 1) Press the AF button on the grip. 2) Turn the front control wheel to: Manual 3) Press Save to store the setting. AF You can also use the shutter release button ‘half-press’ function to save a new setting and automatically return to the main screen. Natural friction is inherent in the design to purposely reproduce the secure feel of a completely manual lens.
Continuous At Continuous setting (AF C), the shutter can be released rapidly before the lens is focused in order to capture a split-second shot (in Single Shot, an exposure cannot be made until the camera has had time to focus). However, the camera will continue to focus if a moving subject is within the focusing zone or if you recompose, even though the shutter release button is half pressed.
Drive There are three drive modes: Single, Continuous and when a film magazine is attached, Multi exposure. They are all accessed by pressing the DRIVE button on the grip. Single 2 1 In Single mode, an exposure is made when the shutter release button is pressed, the film is advanced to the next frame and the camera is made ready for the next exposure. To make the next exposure however, you must first release the shutter release button and then press again.
1 Profiles 2 The profiles feature allows rapid access to pre-determined combinations of settings that increase the speed and security of workflow. One example might be in a social situation where there might be a need for formal outdoor portraiture followed by informal indoor handheld flash-assisted wide-angle shots, both situations requiring very different settings in a stressful environment.
you want and then press the Load (AF) button. All the saved settings will then be automatically implemented. If you decided to change the settings but nevertheless keep the Profile name on the list, the new set of parameters will be retained under that name. That is to say, the settings will not be the same as listed here, despite the name. It might be safer practice to always change the profile name to avoid later confusion. 2 1 Using profiles � 1) From the main screen, click PROFILES (ON.
10 Advanced Features ■ Programmable self timer ■ Programmable bracketing ■ Programmable interval setting ■ More than 25 custom options ■ Data and text imprinting This section describes the features that might not need to be accessed everyday but should be exploited wisely to obtain the optimum from the system. Some features are a little more special, bracketing for example.
General overview of camera menu Self timer options ���� The ‘Digital’ screen will only appear when a digital back is attached! Please see digital back user manual for menu continuation from this point.
There are a number of more advanced features that while not necessarily used every day still remain immediately accessible through the menu system. They provide the integral finesses that make the H2 a powerful and sophisticated tool to satisfy a variety of professional demands. There are four main functions: 1. Self timer 2. Bracketing 3. Interval timer 4. Settings An important point to remember is that certain options are only available when the relevant screen has been accessed.
1 Self timer setting 2 The Self timer function is set in the following manner: � 1) Press the MENU button on the grip. ���� 2) Turn the front control wheel until Self Timer appears. 3) Press ENTER (DRIVE button) on the grip.
Bracketing options available 2 frames or 3 frames or 5 frames options available options available 1/3 EV or 1/2 EV or 1 EV 2 Bracketing The bracketing facility provides an automatic series of exposures; one at the standard exposure setting (Manual or Auto) and the others with pre-determined deviations in EV from the standard exposure. This is particularly useful when using transparency film with images containing a very wide tonal range, for example.
1 Bracketing setting 2 � The Bracketing function is set in the following manner: 1) 2) 3) 4) ���� Press the MENU button.
Interval options available 2 frames - 32 frames options available 1 3 2 1 second - 24 hours Interval By using the interval setting, you can allow the camera to take a series of exposures automatically over a set period. This is often required for time and motion studies, security surveillance, nature study, etc. The exposure and focus settings (Manual or Auto) will be according to the camera settings at the time of exposure.
Settings / Custom Options options available CUSTOM OPTIONS 1 4 2 � From the Settings screen you can access four main sub-settings: Custom options, Image Info, Date & Time and System status by turning the front control wheel. From each of these four sub-settings you can access further screens. Custom options has more than 25 screens, Image Info has two more screens each with more choices, Date & Time has one more screen and System status has two more screens.
Standby timeout 1 image • Dig. foc. check • None • Standby (enters standby) • Stop Down• Flash Measure • Interval timer • Multi Exposure • Self Timer • Bracketing • AF drive ( lens in MF or AF) • 5s • 10s • 15s • 30s Control wheel direction Determines the amount of time the camera remains active before it automatically reverts to standby mode (indicated on the grip LCD by the H2 logo). Minimises battery consumption.
True exposure justment is made and appears on both LCDs as a ± symbol between the shutter speed and aperture values. The amount of deviation also appears above the scale to the left of the aperture value on the viewfinder LCD. 12 • On • Off Determines whether the exposure is automatically adjusted to create a true exposure setting. (See Appendix, Glossary of Terms for full explanation). No turns the function off completely. Control lock 17 On allows the adjustment.
AE lock / Quick adjust 22 • Exp reset • Saved Allows either the AE-Lock or Quick adjust mode to remain active after an exposure or immediately return to standard setting. Exp Reset clears the settings and produces an automatic return to standard setting after an exposure. Saved retains the AE-Lock or Quick adjust settings after an exposure. Show EV 23 • Yes • No Allows the display of EV settings on the grip LCD Yes enables the display. No disables the display.
plus the following that are only available when a digital back is attached: Customizable button function list The USER, AE-L, STOP DOWN and M.UP buttons can all be reassigned to different functions. The USER button has no function until specifically assigned one (default is ‘None’). The AE-L, STOP DOWN and M.UP buttons, however, by default are assigned the function appropriate to the name, until assigned otherwise. Histogram Recalls the last shown histogram. (Not supported by all digital backs).
Image Info 1 4.2 Image Info (film magazines only!) 2 � The Imprint facility controls the text that will appear along the edge of each frame on a film. It is possible to imprint approximately 40 characters at one time. ���� Imprint Type records technical information automatically created by the camera. Text records information created by the user. 4.2.1 4 3 ����� The following can be chosen as an option: • Imp.
Imprint / Text 1 4.2.2 2 Text In Text you can compose your own combination of letters, words, symbols, etc for film edge information. The same procedure is also used to change a Profile name. � ���� Text setting / Profile name changing Press the MENU button on the grip. Turn the front control wheel until Settings appears. Press the Enter (DRIVE) button on the grip. Turn the front control wheel to access 4.2 Image info. Press the Enter (DRIVE) button to 4.2.2 Text.
2) Find the character you want by scrolling with the rear control wheel until it appears on the screen. (The ‘space’ character is the ‘empty space’ to the left of the exclamation mark, top row furthest to the left). 3) Move the selector cursor with a combination of the front and rear control wheels until the desired character is highlighted. 3 2 � � � 4 5 AF ����� ����� ���� Sel. ���� 4) Press the Sel.
Date & Time 1 4.3 Date & Time 2 Adjust date and time settings by the following procedure: � 1) Press the MENU button on the grip. ���� 2) Turn the front control wheel until Settings appears. 4 3 ����� 3) Press the DRIVE (Enter) button on the grip. � ����� 4) Turn the front control wheel to access Date & Time. 5 6 ����� 5) Press the DRIVE (Enter) button.
System Status 4.4 System Status 2 1 � Check component usage for servicing reasons as follows: ���� 1) Press the MENU button on the grip. 2) Turn the front control wheel until Settings appears. 4 3 ����� 3) Press the DRIVE (Enter) button on the grip. � ����� 5 4) Turn the front control wheel to access Info. 6 ����� 5) Press the Enter (DRIVE) button � 6) Press the Enter (DRIVE) button.
11 Flash ■ Sync at all shutter speeds to 1/800s ■ Integral fill-flash ■ SCA 3002 compatible ■ Flash measure capability ■ Rear sync capability The H system meets professional demands for a variety of situations where flash is required. It includes an integral flash primarily intended for fill-flash use but strong enough for simple close work.
The H2 can be used together with most flash units in manual mode. However, to make use of a TTL automatic function, you must ensure the flash unit is compatible with the SCA 3002 system. Connection is either by the PC socket or by the hot shoe (see warning note below). The viewfinder houses an integral fill-flash with a guide number of 12 and features OTF/TTL flash control.
1) Activate the camera and press the FLASH button once. 2) Turn the front control wheel to set the amount of compensation required: • from +3EV through -3EV (amount dependent on ISO setting) • press Clr (AF button) to clear the setting quickly if required.
Separate flash unit connection and use Separate flash units can be electrically connected either by way of the hot shoe accessory holder (see previous warnings) on the top of the viewfinder or via a cord to the PC connection port on the left hand side of the camera body. Slave unit switches/ transmitters can also be connected similarly dependant on unit (see specific user manuals for details). Keep the plastic safety cover in place in the hot shoe when not in use.
12 Optional Accessories ■ Instant film back ■ Converter ■ Extension tubes ■ Rechargeable battery grip ■ Release cord ■ Filters ■ Tripod quick coupling ■ Support strap ■ Grid focusing screen ■ CF adapter ■ Proshade Optional accessories provide the opportunity to extend the capabilities of your system or just to add extra convenience to suit your way of working.
There are a number of optional accessories available for the H2 with more being developed to suit a variety of photographic situations and needs. Please see www. hasselblad.com for the latest information. The figures in brackets after the headings are the product codes. HMi 100 Tripod quick coupling H Mounted on a tripod, this accessory facilitates rapid attachment and removal of the camera. The camera is firmly held in an exact and repeatable position.
13 Appendix ■ Glossary of Terms ■ P and Pv explanatory charts ■ Technical specifications ■ Equipment Care, Service & Guarantee This section provides an insight into the more technical aspects of the H system as well as some important reference information.
Glossary of Terms Half-press / Full press – Shutter release button The shutter release button can be depressed in two different ways. This distinction is referred to in the text as half-press and full-press positions. A half-press is a rapid, soft press whereas a full-press is a firmer and longer depression of the button. For the sake of clarity, here are short and simple explanations of several terms, items and features mentioned in the manual that may be unfamiliar to some.
As an example you might regularly take outdoor portraits of wedding couples with a long lens. You want a specific aperture to restrict depth-of-field and a fairly fast shutter speed to freeze any movement. You are concerned about the couple blinking during the exposure and so want to take several shots in succession, possibly with slight variations in exposure settings for safety’s sake so you might choose the bracketing option too.
True exposure Shutter position T3 = T1 Open Exposure at max aperture (e.g. f/2,8) Exposure at aperture f/4 Exposure at aperture f/4 adjusted with true exposure Closed T1 T2 Time True exposure The effective shutter speed for a central lens shutter is defined as the length of time between the opening and closing when measured at the half height position when expressed in diagram form (see diagram).
Automatic exposure — P & Pv Mode P Mode -5 -4 50 50-110 @ 50 35 50 50-110 @ 50 80 120 50-110 @ 110 80 120 50-110 @ 110 210 150 210 150 -3 -2 -1 1 0 2 3 4 5 6 7 8 9 10 Aperture A perture 17 11 18 16 19 22 20 32 21 45 22 64 23 32s 16s 8s 4s 2s 1s 2 4 8 15 30 60 125 250 500 1000 -1 1 0 2 3 4 5 6 7 8 9 13 14 15 16 8 17 11 18 16 19 22 20 32 21 45 22 64 90 64s 23 32s 16s 8s 4s 2s 1s 2 4 8 15 SShutter huttersspeed peed
Technical specifications Camera Type Auto-focus, auto-exposure SLR camera with interchangeable magazines, viewfinders and lenses. Construction One piece stainless steel shell. Die-cast aluminium internal structure. Tripod sockets (1/4 and 3/8”) and quick coupling tripod plate for rapid mounting. Lenses Hasselblad HC lenses with built-in electronically controlled shutter and aperture. Automatic or manual focusing with instant manual focus override.
Auto bracketing Bracketing using predetermined number of exposures (2, 3 or 5) in 1/3, 1/2, or 1 EV step difference intervals. Interval timer Number of frames from 2 to 255 and interval from 1 second to 24 hours. Film speed Film speed range ISO 6 to 6400. Automatic setting with Barcode film. Displays The camera features two dot-matrix LCD’s that provide clear and easy-to-understand information to the user. One is located on the grip and the other in the 90° viewfinder.
External dimensions approx. 135 mm 5.3 ins approx. 155 mm approx. 207 mm (80 mm lens) 6.1 ins 8.2 ins H2 Data imprinting modes Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Enhanced exposure information Basic exposure information Date & Time Text & Date Text & Info Text Aperture Shutter speed Light metering mode Exposure mode Exposure adjustment Flash symbol Flash exp.
BODY Default setting (Standard Profile) Exp.mode LM mode Exp. adjust Focus mode Drive mode Flash sync Flash adjust Self timer Bracketing Interval timer Custom options Imprint FILM MAGAZINE Film speed Film length Data imprinting Frame counter A (Aperture priority) Centre weighted 0 AF-S S Normal (beginning of exp.
the lens or touch any of the glass surfaces with your fingers. If in any doubt, do not attempt to clean lens glass surfaces yourself but allow a “Hasselblad Authorized Service Center” to treat them. Problems, Equipment Care, Service & Guarantee The H2 is a very sophisticated camera that relies on much information being passed and processed to and from each modular unit to produce the correct behaviour.
Victor Hasselblad AB and Hasselblad A/S reserve the right to make changes in descriptions, technical specifications and instructional information without prior notice and accepts no responsibility whatsoever, financial or otherwise, for any damages or losses incurred in connection with Hasselblad equipment.
Victor Hasselblad AB Hasselblad A/S Box 220, Hejrevej 30, SE - 401 23 Göteborg, DK - 2400 Copenhagen, Sweden Denmark 91
