User's Manual

13
3635
3433
The camera is now complete and ready to use. If you
press the ON.OFF button A for half a second, the cam-
era will activate. If the camera enters STANDBY mode
(the LCD screen on the grip will show the H2/D sym-
bol only), reactivate it by pressing the shutter release
button B halfway (or the ON.OFF button).
You can now explore the menus, buttons, control
wheels, etc observing the changes on the LCD on the
grip as well as the LCD in the viewfinder.
..........................................................................
and finally ...
to ensure the camera is at the standard setting:
33. Click the ON.OFF button.
34. The LCD then displays the Profile screen.
35. Turn either the front or rear control wheel until ‘Standard’ is
highlighted.
36. Press the AF / Load button.
That’s it!
Your Hasselblad camera is now operational in fully auto-
matic mode. In average lighting conditions the camera
will act as a point and shoot camera producing extremely
fine results without the need to touch any other button
than the shutter release!