User's Manual

■ Aluminium cast in one piece

■ Stainless steel shell

■ Integral Quick coupling plate

■ Digitally controlled

■ Upgradeable software

■ Modular design

■ Integral ergonomic grip

■ Pixel based LCD user interface

Camera Body

The H2/D camera body is a robust construction of cast aluminium

with a stainless steel shell for extreme durability. The workings of

the camera are controlled by silicon technology that provides tre-

mendous opportunities for sophisticated operation. To take just

two examples, the mirror return is slowed down at the last mo-

ment by controlling the motor to decrease vibrations and the cur-

rent usage status of the camera body, lenses etc is recorded and

freely accessible for service intervals, etc.

The integral ergonomic grip houses the main control interface and

also contains the battery holder. An auxiliary shutter in the rear

opening of the camera body protects the sensor unit from exposure

during the various camera procedures. Please take extra care when

handling the camera body without a protective cover or the sen-

sor unit in place to protect the auxiliary shutter. Likewise, the front

opening of the camera body reveals the mirror when unprotected

by a cover or lens. Do not touch or attempt to clean the mirror—

slight marks or dust particles will not affect results. More notice-

able problems, however, should be taken care of by a Hasselblad

Authorized Service Center. The camera body also contains the view-

ﬁnder screen, which can be easily removed or exchanged without

the use of special tools or adjustment procedures.