User's Manual

Making exposure settings and taking shots

Cameras other than the H2 are not able to communicate with the CFH. You must there-

fore make exposure settings as follows when you use a view camera:

1. Select an ISO rating for the CFH using the FlexColor software.

2. Take light-meter readings and set aperture and shutter speed as would be appropri-

ate for exposing ﬁlm of your selected ISO rating.

3. Using FlexColor, set the camera-back exposure time to be just slightly longer than

the value to found for the camera body.

4. Press the shutter release on your camera body to take the picture. This will trigger

the CFH, computer and (if connected) ﬂash system via the attached cables.