User's Manual

General

Whichever way you choose to store your images, they should be ﬁled in batches for ef-

ﬁcient workﬂow.

Organizing your work with batches

Batches help you to organize your shots as you work. ey function exactly as folders on

a computer. Batches have the following properties:

• When you create a new batch, you assign a name to it and it is created as a new folder.

• When you copy images from a compact-ﬂash card, each batch is saved as a sub-folder on

the destination disk.

• When deleting multiple images, you are able to restrict your delete command so that it

aﬀects just a single batch.

• When browsing images, you will only see images from the current batch.

• You can change between batches by using the navigation controls of the sensor unit front

panel.

• The OLED shows the date on which each batch was created.

 Please note that each new image will be saved in the latest created batch only. You

cannot select any other batch to save a new image in.

Navigating media and batches

e camera always works with a current medium and a current batch. is is the location at

which the camera will save all new shots and the location in which you can browse us-

ing the navigator button on the front panel. ere are two ways of selecting the current

medium and/or batch:

• Using the zoom and navigator buttons of the front panel. This method enables you to select

any existing batch and is therefore useful even when only one type of medium is attached.

This method is explained in the procedure below.

• Using the MAIN MENU > Storage entry of the menu system to choose a medium. This

is only relevant when more than one medium is attached (e.g., both a compact ﬂash card

and an Imagebank). When you use this function, you will always go to the most recently

created batch from the medium you select. Please see Selecting the Current Storage

Medium for a complete description of this method.

Storage –

Working with

media and

batches