User's Manual

87
1 2
3 4
5 6
7 8
9
Setting CAMERA model and options
Proceed as follows:
1. Press the menu (MENU) button to open the menu.
2. Use  and  to select the SETTINGS sub-menu.
3. Press  to open the SETTINGS menu.
4. Use  and  to select CAMERA.
5. Press  to open the CAMERA menu.
6. Press either the or button to select camera model.
7. Use  and  to select EXPOSURE TIME or CAPTURE SEQ.
if required.
8. Press either the or button to make new settings if
required.
9. Press the menu (EXIT) button to exit the menu system and
keep your settings.
Options available for PINHOLE and FLASH SYNC
Shutter Delay
e normal setting is Default and cannot be changed.
Exposure Time
is setting should be changed for cable-free exposure times longer
than 1/8 second, ensuring that it matches the set shutter speed on
the camera/lens. e settings range from 1/8 second to 32 seconds
(1/8 second is the default setting).
Capture Sequence
is feature functions in the same manner as an interval timer.
Initial delay: Controls the amount of time required to elapse
before the first exposure.
Delay: Controls the amount of time required between each ex-
posure.
Count: Controls the total number of exposures required.