User's Manual

89
11. Press either the or button to make an INITIAL DELAY
setting.
This setting controls the amount of time that elapses
before the first exposure in the sequence.
12. Press  to select DELAY.
13. Press either or to make a DELAY setting.
This setting controls the amount of time between each
exposure in the sequence.
14. Press  to select COUNT.
15. Press either or to make a COUNT setting.
This setting controls the number of exposures in the
sequence.
16. Press OK to confirm all the settings.
17. The CFH is now ready for sequence start. Note that the MENU/
EXIT button now diplays START instead:
18. Press START to set the sequence running.
19. Note that the EXIT button now displays STOP. The sequence
can be stopped at any time by pressing this button and the
standard menu display returns.
11 12
13 14
15 16
17 18
19