User's Manual

92
1



2
MAIN MENU > SETTINGS > Default
e DEFAULT setting will reset all custom settings you have made
back to the original default / factory settings.
To reset all settings:
1. Select the MAIN MENU > SETTINGS > DEFAULT entry.
2. Press the OK button and then the EXIT to return.
Don’t forget the
menu shortcuts!
To help you work faster, the digital
back provides shortcuts to some
of the most commonly used menu
commands that do not otherwise
have a dedicated button on the
front panel.
These are accessible by pressing
and holding one of the front-pan-
el buttons for a second or so. These
are mentioned where appropriate
elsewhere in this manual, but we
summarize them here for your
convenience.
Try to memorize these quick
actions to save time and effort
later!
To set the browse filter
To delete images
To toggle the over-
exposure indicator
Press and hold until your preferred filter
is indicated.
See also ‘Using Instant Approval
Architecture’.
Select the target image and then press
and holduntil the delete dialog
opens.
See also ‘MAIN MENU > Delete’.
Press and hold

until the display begins
to flash (or stops flashing) its overex-
posed areas.
See also ‘Overexposure Indicator’.