User's Manual

17
 Aluminium cast in one piece
 Stainless steel shell
 Integral Quick coupling plate
 Upgradeable software
 Modular design
 Integral ergonomic grip
 Pixel based LCD user interface
Camera Body
2
The H2F camera body is a robust construction of cast aluminium
with a stainless steel shell for extreme durability. The workings of
the camera are controlled by silicon technology that provides tre-
mendous opportunities for sophisticated operation. For example,
mirror return is slowed down at the last moment by controlling the
motor. Usage status of the camera body is automatically recorded
for service intervals and so on.
The integral ergonomic grip houses the main control interface
and also contains the battery holder. An auxiliary shutter in the
rear opening of the camera body protects the sensor unit from ex-
posure during the various camera procedures. The camera body
also contains the viewfinder screen, which can be easily removed
or exchanged without the use of special tools or adjustment
procedures.
Please take extra care when handling the camera body without a
protective cover or lm magazine to protect the auxiliary shutter.
Likewise, the front opening of the camera body reveals the mirror
when unprotected by a cover or lens. Do not touch or attempt to
clean the mirror yourself—marks or dust particles will not affect
results in any case. More noticeable problems, however, should be
taken care of by a Hasselblad Authorized Service Center.