User's Manual

7
Take a few minutes to familiarize yourself with the H2F and its various controls. Note the dierence
between a long press, a short press and a click’ with some buttons. For example from the main screen
a click of the ON.OFF button will take you to Proles while a longer press will turn the camera o.
With your right hand holding the ergonomic grip for security and control, your thumb and ngers
have immediate access to all the controls without letting go. The H2F sits comfortably in the palm of
your left hand for support but leaves your ngers free for eventual manual focus adjustments.
Note the changes on the LCD as you press the various buttons and rotate the control wheels. Notice
too the changes in the viewfinder LCD as you do the same. You cannot damage the camera by
pressing the wrong buttons or controls or using them in the wrong order. The worst that can hap-
pen is that you might get ‘lost’ in the menu or you might activate a certain action that takes time to
complete. In this case simply click on the escape button (ON-OFF - PROFILES / ESC) to return to the
‘main’ screen again.
Attempt a half-press with the shutter release button with the camera set at autofocus too see how
the lens focuses and the light metering reacts. Notice that the lens barrel does not revolve in auto-
focus but you can immediately change the focus manually and immediately revert to autofocus
again by using a half-press again.
Note the readily accessible customizable buttons that provide direct access to most functions (in-
vestigate how you can exploit this excellent function to the full in a later section).
Note the safety features integral in the magazine so you cannot remove a magazine without the
darkslide in place or (unless set otherwise) make an exposure with the darkslide in place.
Feel for the stop down button positioned between the lens and the grip.
Press the AF button and then turn the front control wheel to change from AF single to AF continu-
ous to Manual to try out the dierences in how the camera behaves in these dierent modes, for
example.
Press the EXP button on the viewnder and then turn the rear control wheel to change the metering
method to see the changes in sensitivity of the exposure meter.
Quite simply, just explore the camera for a little while to feel at home with the general handling and
the idea of control buttons and wheels and LCD information, etc. The sooner you become accus-
tomed to moving the controls instinctively the sooner you will be able to eortlessly use the nesses
on oer.
The remainder of this manual will slowly take you through, stage for stage, each feature and setting
so that you can master this marvellous piece of photographic equipment and exploit it to the full.
Finally, remember to check occasionally with your camera dealer or on the Hasselblad website to
see whether a rmware update is available. The functions and options described in this manual
refer to the rmware version the camera was shipped with. The ability to update camera rmware is
an advantage you should not forget to make full use of to maximize the capabilities of your H2F!
Familiarize yourself with the H2F