User's Manual

ManualsBrandsHASSNET ManualsAudio EquipmentBluetooth Headset

Guidelines for your safe

Read this information before using your headset.

Please check for any information on RF exposure in usage of Bluetooth headset.

▪ When your headset is turned on, it transmits and receives a Radio frequency electromagnetic fields

in the frequency range 2.402 ~ 2.480 GHz. Your headset is designed to operate in compliance with the RF

exposure guidelines and limits set by national authorities and international health agencies when used

with any compatible devices.

•Do not touch your headset and power plug with wet hands.

•Keep the headset dry. Humidity and all types of liquids or moisture can corrode electronic circuits.

•Do not store the headset in hot or cold areas. High temperatures and changing temperature like up

to normal or higher from cold temperatures can shorten the life of electronic devices, damage batteries

and certain plastics.

•Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the headset.

•Do not attempt to open the headset. Non-expert handling may damage it. If the headset is not working

properly, take it to your nearest authorized service center.

[Regarding Battery]

•Use only batteries approved by Hassnet and recharge your battery only with the chargers

approved by Hassnet.

•The batteries are consumables so it will eventually wear out. When the operating time is noticeably

shorter than normal, it is time to buy a new battery. To get a new one, ask to authorized service

centers.

Summary of content (8 pages)

PAGE 1
Guidelines for your safe Read this information before using your headset. Please check for any information on RF exposure in usage of Bluetooth headset. ▪ When your headset is turned on, it transmits and receives a Radio frequency electromagnetic fields in the frequency range 2.402 ~ 2.480 GHz. Your headset is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used with any compatible devices.
PAGE 2
What’s in the box? BHE10 Features at a Glance Front Back User Manual Power Charger
PAGE 3
Putting on the headset Adjusting the earloop for right ear and left ear Your headset fits your right and left years. Getting started To use your headset, do the following proper steps: Charging Æ Turn on the headset Æ Pairing with your phone Æ Using the headset ▪ Charge the headset battery fully, using the charger packed with your headset together. : For instruction on how to charge your headset, see Charging page 13. ▪ Turn your headset on. : For instruction on how to turn on your headset, see page.
PAGE 4
Pairing To turn the headset on ▪ Press and hold the ‘Talk and Power button’ for more than 3 seconds. ▪ Indicator shows a blink in Red followed by a blink in Green and you can hear a short low tone followed by a short high tone. Then the headset is now turned on. Note: [connectable mode] If the headset has the record that once it connected to the phone that you want to make a pairing, after the headset is turned on, indicator flashes green every 5seconds.
PAGE 5
Using the headset Answering calls ▪ When the phone rings, headset rings and the indicator flashes red. ▪ Press the ‘Talk and Power button’. ▪ To reject a call, press ‘Volume-up button’ or ‘Volume-down button’. But, for this function, your mobile phone need to support the reject function. ▪ To End the call, press the ‘Talk and Power button’. Making calls [Voice dialing] ▪ To make a call using your headset, your mobile phone need to support voice dialing and it is activated.
PAGE 6
Muting the Microphone During a call, you can mute the microphone of your headset not to hear your conversation to the opposite of the line. ▪ During a call, press ‘Volume-up button’ and ‘Volume-down button’ together. ▪ You can hear a low tone every 3 seconds while the microphone is turned off. ▪ To resume your call, press ‘Volume-up button’ or ‘Volume-down button’. Transferring calls ▪ Ongoing call with your phone, to transfer the call to the headset, press ‘Talk and Power button’ of the headset.
PAGE 7
Audio & Visual Indicators Indicator Light Chart State of Headset State of Indicator Light In process of Power Off Green blink followed by Red blink Power Off Off In process of Power On Red blink followed by Green blink Pairing Mode Flashes Red every 2 seconds Connectable Mode Flashes Green every 5 seconds Connected Mode Flashes Green every 10 seconds Incoming Call Flashes Red On the line Off Charging in process Steady Orange Charging Complete Steady Green Beep Tone Chart State of Heads
PAGE 8
Brief Specification Bluetooth Compliance Bluetooth 1.1 with Headset Profile and Handsfree Profile Frequency Range 2.402 ~ 2.480 GHz Transmission output power 0.25 ~ 2.5mW Maximum Cordless Distance 30 feet (10 meters) Dimension of Headset 67mm x 26mm x 12mm Weight of Headset 18.