User's Manual

Pairing
To turn the headset on
▪ Press and hold the ‘Talk and Power button’ for more than 3 seconds.
▪ Indicator shows a blink in Red followed by a blink in Green and you can hear a short low tone
followed by a short high tone. Then the headset is now turned on.
Note
: [connectable mode] If the headset has the record that once it connected to the phone that you
want to make a pairing, after the headset is turned on, indicator flashes green every 5seconds.
Note
: [pairing mode] In case the headset is turned on for the first time, it might automatically be ready
for pairing. Therefore, the headset indicator light flashes red every 2 seconds.
To turn the headset off
▪ Press and hold ‘Talk and Power button’ for more than 3 seconds.
▪ Indicator shows a blink in Green followed by a blink in Red and you can hear a short
high tone followed by a short low tone. Then the headset is now turned off.
Pairing the headset with a phone
When you use your headset for the first time
You need to pair the headset with the phone that you want to use is with.
▪ In case the headset is turned on for the first time, it might automatically be ready for pairing.
Therefore, the headset indicator light flashes red every 2 seconds.
▪ Prepare your phone according to the phone’s user documentation on pairing.
▪ Continue according to the instructions in the phone’s user manual.
▪ The passkey of headset’s default passkey is [0000].
▪ When pairing has been completed, the headset indicator light flashes green every 10 seconds.
Note: It’s better to try to pair your headset with the phone in close.
Note: Once you have paired your headset with the phone, you don’t need to pair it again until you want to
use it with another phone.
When you want to use it with another phone
When you want to use your headset with another phone that isn’t the phone that you paired your headset
with, you need to pair it again.
▪ Press and hold the ‘Volume-down button’ or ‘Volume-up button’ and ‘Talk and Power button’ for
3 seconds together.
Then, the headset indicator light flashes red every 2 seconds and your headset is now ready for pairing.
▪ Prepare your phone according to the phone’s user documentation on pairing.
▪ Continue according to the instructions in the phone’s user manual.
▪ The passkey of headset’s default passkey is [0000].
▪ When pairing has been completed, the headset indicator light flashes green every 10 seconds.