User's Manual

Muting the Microphone
During a call, you can mute the microphone of your headset not to hear your conversation to the
opposite of the line.
▪ During a call, press ‘Volume-up button’ and ‘Volume-down button’ together.
▪ You can hear a low tone every 3 seconds while the microphone is turned off.
▪ To resume your call, press ‘Volume-up button’ or ‘Volume-down button’.
Transferring calls
▪ Ongoing call with your phone, to transfer the call to the headset,
press ‘Talk and Power button’ of the headset.
▪ Ongoing call with your headset, to transfer the call to the phone,
it depends on the phone’s function. Refer to the phone’s user guide for this function.
Low battery indication
▪ When the battery of your headset becomes low, the headset generate three (3) rapid high tones
and it is repeated every 30 seconds.
▪ As soon as you detect the low battery, it’s better to connect the charger to the headset.
▪ Charge the battery till the indicator turns green.
Initializing the headset
You may want to reset the headset to its default settings. This clears all the current pairings.
▪ With the headset turned on, press and hold ‘Volume-up button’ or ‘Volume-down button’ and ‘Talk
and Power button’ together for up to 3 seconds until the indicator flashes red every 2 seconds and
you can hear a short beep.
▪ Now, your headset has been reset with default value.
Note
: In case your Headset malfunctions, you can do Hardware reset by pressing ‘reset button’,
using a peaked implement, placed on the conjunction part of an earloop to the body.