wiREVO HSH200 User Manual Preliminary version 0.4 User Manual Bluetooth Stereo Headset wiREVO HSH200 ver. HSH200E004 Date: Jul. 13, 2006 Hassnet Confidential Page 1 of 16 Hassnet, Inc.
wiREVO HSH200 User Manual Preliminary version 0.4 1. Introduction wiREVO Stereo Headset series will lead you to the mobility and allows you freedom and there isn’t any limitation and any disturbance. The main functions of wiREVO HSH200 are as follows; z z z z Wireless Stereo Headset Wireless Remote Controller Wireless Hands-free Caller ID Read this user manual carefully before using the stereo headset.
wiREVO HSH200 User Manual Preliminary version 0.4 2. Guidelines for your safety Before use, read the warnings and other information in this manual. Please check for any information on RF exposure in usage of a Bluetooth stereo headset. When your stereo headset is turned on, it transmits and receives radio frequency electromagnetic fields in the frequency range 2.402 ~ 2.480 GHz.
wiREVO HSH200 User Manual Preliminary version 0.4 Keep earphone cords/necklace under control to avoid getting caught on various objects. [Battery] Your stereo headset is equipped with a high-performance Lithium Ion battery. Observe the maintenance guidelines and your battery should give you a long service life. Use batteries and chargers only provided and approved by Hassnet. The batteries are consumables and will eventually wear out. Avoid charging in strong heat or extreme cold.
wiREVO HSH200 User Manual Preliminary version 0.4 Before Using 1. What’s in the box? Accessories are subject to change without notice and may vary from image shown. 2. Features at a glance Actual stereo headset may vary slightly from images shown. Date: Jul. 13, 2006 Hassnet Confidential Page 5 of 16 Hassnet, Inc.
wiREVO HSH200 User Manual Preliminary version 0.4 3. Putting on the stereo headset 4. Adjusting the length of necklace The necklace is designed to be untied if it’s strained for your safety but you can reassemble it. 5. How to plug-in the earphones to a stereo headset body 1. Hold the connection part of a necklace and push it into the direction of arrow. 2. Hold the connection part and rotate it to the direction of arrow. 6. How to plug-out the earphones from a stereo headset body 1.
wiREVO HSH200 User Manual Preliminary version 0.4 7. Charging Before using the stereo headset for the first time, make sure the stereo headset is fully charged. Connect the charger or USB cable to the stereo headset. The indicator light in LCD will go out when the battery is fully charged. [Charging with Adapter] The indicator light in LCD will go out when the battery is fully charged. [Charging with USB Cable] The indicator light in LCD will go out when the battery is fully charged.
wiREVO HSH200 User Manual Preliminary version 0.4 Before using 1. Turning ON/OFF z To turn on the stereo headset, push the power switch ( ) to the direction for ‘ON’. z To turn off the stereo headset, push the power switch ( ) to the direction for ‘OFF’. 2. Paring with a Bluetooth audio device You need to pair the stereo headset with the Bluetooth audio device that you intend to use it with. This process is to set-up a unique wireless link between two devices.
wiREVO HSH200 User Manual Preliminary version 0.4 ! Note With some Bluetooth audio devices, the stereo headset can be connected automatically after pairing. [Connected mode] In this case, the stereo headset displays “Stereo”, “HandsFree” or “Headset” according to the connected service. ! Note In pairable mode, if the stereo headset has not been paired for 3 minutes, the stereo headset displays “Pairing Fail” & “Retry Pls!” in turn with one another.
wiREVO HSH200 User Manual Preliminary version 0.4 3. When the connection is completed [Connected mode], you can use the stereo headset for the selected service(s). On LCD, “Stereo”, “Headset” or “HandsFree” is displayed. ! Note Some Bluetooth audio devices may not accept the connection from a stereo headset. Please check the user manual of your Bluetooth audio device.
wiREVO HSH200 User Manual Preliminary version 0.4 Using the stereo headset 1. Playing music PLAY z z z Press Play/Pause/Stop ( ) button while being connected to your Bluetooth audio device. Press Play/Pause/Stop ( ) button while music is stopped. The music automatically comes back after you ended a call if you answered a call while listening to music. PAUSE z z Press Play/Pause/Stop ( ) button while listening to music. Press Play/Pause/Stop ( ) button again to listen to the song from the paused part.
wiREVO HSH200 User Manual Preliminary version 0.4 2. Phone call control while listening to music TIP In a noisy environment, the clearance of the voice quality would be better if you hold the stereo headset and keep the distance 10cm from your mouth. During the music playing, when a call is received, the music will be paused automatically and you will hear the ringing from the speaker. You can check the caller ID on the LCD when it’s connected as a hands-free profile.
wiREVO HSH200 User Manual Preliminary version 0.4 4. Making calls Make sure that your stereo headset is connected to your mobile phone. Using a mobile phone z Using the phone’s keypad, dial the required number. z Send the call from the phone (Phone initiates the call). z The call will automatically transfer to the stereo headset. But for some mobile phones, you must press Talk ( ) button to make the call transfer to the stereo headset. Please refer to your phone’s user guide.
wiREVO HSH200 User Manual Preliminary version 0.4 Specification & Certifications 1. Brief Specification Bluetooth Compliance Frequency Range Transmission output power Maximum Cordless Distance Dimension Weight Operating Temperature Relative Humidity Standby Time Talk Time Play Time Battery Type Adapter Rated input Adapter Rated output z Bluetooth 2.0 with A2DP, AVRCP, HFP and HSP 2.402 ~ 2.480 GHz 0.25 ~ 2.5mW 30 feet (10 meters) 38pie X 15.5mm 21.
wiREVO HSH200 User Manual Preliminary version 0.4 2. Certifications This Product is CE marked according to the provisions of the R&TTE Directive 1995/05/EC. Hereby, Hassnet, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1995/05/EC. For more information please consult http://www.hassnet.com and http://www.wirevo.com. This device complies with part 15 of the FCC Rules.
wiREVO HSH200 User Manual Preliminary version 0.4 Thank You. To receive sales literature and technical assistance, please contact Hassnet, Inc. Contact: sales@hassnet.com support@hassnet.com HASSNET, INC. 6fl. Techno Complex Bldg., Korea Univ. 126-16, Anam-dong 5-Ka, Seongbuk-Ku, Seoul, Korea 136-701 Visit our Web sites at www.hassnet.com, www.wirevo.com Printed in Korea Date: Jul. 13, 2006 Hassnet Confidential Page 16 of 16 Hassnet, Inc.
