User's Manual

wiREVO S300 User Manual Preliminary version 0.2
4. Making calls
 Make sure that your stereo headset is connected with your mobile phone.
 Using a mobile phone
z Using the phone’s keypad, dial the required number.
z Send the call from the phone (Phone initiates the call).
z The call will automatically transfer to the stereo headset. But for some mobile phones,
you must press Talk ( ) button to make the call transfer to the stereo headset. Please
refer to your phone’s user guide.

Using redialing the last call
z With your stereo headset, you can re-dial the last call dialed or received.
z Press Talk ( ) button and you can see the latest call numbers on the mobile phone.
z Press Talk ( ) button again.
z After you hear the short beep, you will hear the dialing tones from speaker.
! Note Some mobile phone may re-dial the last call by pressing Talk ( ) button once.

Using voice dialing
z To make calls using voice dialing with your stereo headset, your mobile phone needs
to support voice dialing and the feature must be activated.
z Press and hold Talk ( ) button for 2 seconds and you can hear a short beep. Voice dial
as you normally would.
! Note It is dependent on the mobile phone’s function and is possible when the mobile
phone supports Hands-free profile.
5. Transferring calls
z To the Stereo headset
Press Talk ( ) button during a phone call on the mobile phone.
z To a Mobile Phone
Depends on the mobile phone‘s function. Refer to the user manual of a mobile
phone.
6. Adjusting the volume
z Press Volume Up ( ) button or Volume Down ( ) button to adjust the speaker volume
during a phone call.
Date: Jul. 13, 2006 Page 13 of 16
Hassnet Confidential Hassnet, Inc.