User's Manual

wiREVO S300 User Manual Preliminary version 0.2
2. The following steps are the same with [When you use the stereo headset for the first
time].
3. Deleting the paired devices’ information
 You can delete the paired devices’ information.
z Switch ON ( ) with pressing Talk ( ) button and Play/Pause/Stop ( ) button together.
4. Connecting with a Bluetooth audio device
 To connect the stereo headset with your Bluetooth audio device, you need to pair the two
devices first.
 With some Bluetooth audio devices, the stereo headset can be connected automatically after
pairing without following additional process.
1. Turn on by switching ON ( ) and setup it as connectable status.
The blue indicator light will flash per 3 second [Connectable mode].
2. Connect the stereo headset with the device by any method below.
[Connect by a Bluetooth audio device]
z Connect following the instructions in the Bluetooth audio device’s user manual.
[Connect by the stereo headset]
z To use Music Play service, press Play/Pause/Stop ( ) button.
In this case, only Music Play service is connected.
z To use Hands-free service, press Talk ( ) button.
In this case, only Hands-free service is connected.
z To use Music Play service and Hands-free service at the same time, press
and hold Play/Pause/Stop ( ) button for 2 seconds.
3. When the connection is completed, the blue indicator light flashes per 6 seconds
[Connected mode] and the blue indicator light will not flash during the stereo headset is
doing an actual work such as calling, playing, etc. [Active mode]
[!] Note Some Bluetooth audio devices may not accept the connection from the stereo
headset. Please check the user manual of your Bluetooth audio device.
[!] Note This stereo headset supports A2DP, AVRCP, HSP and HFP. From a Bluetooth
audio device you can search the services of this stereo headset and select the
service to be connected. The searching, selecting and connecting process are
dependent on your Bluetooth audio devices.
- A2DP: Advanced Audio Distribution Profile
- AVRCP: Audio Video Remote Control Profile
- HSP: Headset Profile
- HFP: Hands-free Profile
(Profile is a set of Bluetooth commands that the devices use to control the stereo
headset)
5. Cutting the connection
z Turn off the stereo headset by switching OFF ( ) or disconnect by the Bluetooth audio
device. In this case, the blue indicator light will flash per 3 seconds. [Connectable mode]
Date: Jul. 13, 2006 Page 9 of 16
Hassnet Confidential Hassnet, Inc.