Glo-Ray ® Mini-Merchandisers GRDW-2 GRKW-1 Installation & Operating Manual I & W #07.05.081.
CONTENTS Important Owner Information..................................i Introduction.................................................................i Important Safety Instructions ..................................1 Model Descriptions All Models............................................................1 GRDW-2 ..............................................................1 GRKW-1 ..............................................................2 Specifications Electrical Rating Chart GRDW-2 ................
IMPORTANT SAFETY INSTRUCTIONS WARNINGS/CAUTIONS 5. Locate the unit at the proper counter height, in an area that is convenient for use. The location should be level to prevent the unit or its contents from accidentally falling, and strong enough to support the weight of the unit and food. Read the following important safety instructions to avoid personal injury and/or damage to the equipment. 1.
SPECIFICATIONS ELECTRICAL RATING CHART - GRDW-2 Model Voltage Watts Amps 120 1230 220 1172 240 1270 GRDW-2 Plug Configuration Shipping Weight 10.3 NEMA 5-15P 65 lbs. (30 kg) 5.3 CEE 7/7 Schuko 65 lbs. (30 kg) 5.3 BS 1363 65 lbs. (30 kg) ELECTRICAL RATING CHART - GRKW-1 Model Voltage Watts Amps Plug Configuration Shipping Weight 120 545 4.5 NEMA 5-15P 37 lbs. (17 kg) GRKW-1 Shaded areas pertain to Export Models Only.
INSTALLATION ALL MODELS GRDW-2 Glo-Ray Mini-Merchandisers are shipped with most components pre-assembled. Care should be taken when unpacking shipping carton to avoid damage to unit and components enclosed. 1. Position front breath protector top holes with weld studs in upper channel. Loosely fasten using cap nuts provided. See Figure 5. 2. Secure bottom of breath protector using three 5/8" Phillips head screws provided. Tighten top and bottom hardware securely but do not overtighten.
INSTALLATION LOCATION WARNING Locate the unit at the proper counter height, in an area that is convenient for use. The location should be level to prevent the unit or its contents from accidentally falling, and strong enough to support the weight of the unit and food displayed. CAUTION For safe and proper operation, the unit must be located a reasonable distance from combustible walls and materials. If safe distances are not maintained, discoloration or combustion could occur.
MAINTENANCE CLEANING LIGHT BULB REPLACEMENT Hatco Glo-Ray Mini-Merchandisers are designed for maximum durability and performance, with minimum maintenance. The display lights are shatter-resistant, incandescent light bulbs which illuminate the warming area. These bulbs have a special coating to guard against injury and food contamination in the event of breakage. WARNING 1. To replace a light bulb, disconnect the power supply from the unit and wait until the unit has cooled.
HATCO LIMITED WARRANTY THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR PATENT OR OTHER INTELLECTUAL PROPERTY RIGHT INFRINGEMENT.
NOTES __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ ___________________________________________________
NOTES __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ ___________________________________________________
NOTES __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ ___________________________________________________
HATCO AUTHORIZED PARTS DISTRIBUTORS ALABAMA Jones McLeod Appl. Svc. Birmingham 205-251-0159 LOUISIANA (Continued) Bana Comm. Parts, Inc. Shreveport 318-631-6550 OHIO (Continued) E. A. Wichman Co. Toledo ARIZONA Auth. Comm. Food Equip. Phoenix 602-234-2443 Byassee Equipment Co. Phoenix 602-252-0402 MARYLAND Electric Motor Service Baltimore 410-467-8080 GCS Service, Inc. Silver Spring 301-585-7550 OKLAHOMA Hagar Rest. Service, Inc. Oklahoma City 405-235-2184 Krueger, Inc.