Smart True HEPA Air Purifier Model HSP001
CONTENTS Specifications 1 Features 1 Product Diagram 3 Smart Air Quality Sensor 4 Filter Installation 5 Filter Maintenance 6 Operation 7 Precautions 9 Troubleshooting 11
SPECIFICATIONS Product Name Smart True HEPA Air Purifier 120V Rated Voltage Please refer to the nameplate on the back of machine.
Cold Catalyst Filter First, a Cold Catalyst Filter targets and removes large particles including but not limited to dust mites, pet hair, skin cells, and mold spores. Additionally, it assists in the decomposition of formaldehyde, ammonia, benzene, and TVOC’s. Activated Carbon Filter High Grade Active Carbon absorbs smoke, odors, gases, and volatile organic compounds (VOC’s). We don’t skimp on the carbon.
PRODUCT DIAGRAM (2) (4) (1) (3) (5) (8) (6) (7) (9) (11) (12) (10) (1) Display (7) Ionizer (2) Control Panel (8) Sleep Mode (3) Power (9) Front plate (4) Light (10) Air Inflow (5) Timer (11) Handle (6) Fan Speed (12) Air Outflow 3
SMART AIR QUALITY SENSOR 88 AIR QUALITY TIMER AUTO ANiON H POWER SLEEP The Smart Air Quality Sensor detects particles and odors in real time, feeding that info to the purifier so it can adjust. This keeps your air quality consistently clean, while reducing power consumption and your electric bill.
FILTER INSTALLATION Pull the front plate toward you from its base and its magnets will release the bottom of the front cover. Then lift upward on the front plate to remove it completely, exposing the filter. Turn buckles and remove filter gently by pulling outward. Remove packaging film from filters before use. Place Filter 2 (Antibacterial and HEPA Filter) back into the unit. Note: ensure tab is facing you. Place filter 1 (Cold Catalyst Filter) back into the unit. Note: ensure tab is facing you.
Make sure filters are installed correctly, with tabs facing you. Lock filters in place by turning the buckles to secure them. Reinstall the front plate by first placing the top of the front plate into the notches on the top of the purifier. Next, let the bottom magnets connect. Make sure the front plate is secure before powering on. FILTER MAINTENANCE Note: To ensure your warranty remains active and to avoid shortening the life of your air purifier, use only certified Hathaspace filters.
OPERATION On/Off Timer Your included remote gives full control of your purifier from across the room and is powered by 2 AAA batteries (not included). Speed Sleep Auto Anion Air Quality H Timer Low Auto Anion Medium High Power Sleep Power Plug in the purifier. The red power indicator will light up. Use the Power button on the unit or remote to turn on/off. The purifier will start in AUTO mode and the smart sensor will automatically initiate when the unit is turned on.
Air Quality H Timer Low Auto Anion Medium High Power Sleep Sleep Press the Sleep button on the unit or remote to put the purifier in sleep mode. In sleep mode, the unit will run at a whisper-quiet speed with the lights off, and the smart sensor will turn off. If you would like to have the lights off while operating in other fan modes, then just press the Light button in your preferred mode and the lights will shut off. Press any of the buttons to exit sleep mode.
PRECAUTIONS Before use, read entire manual thoroughly and keep it for future reference. Hazardous To avoid electric shock or fire, ensure that the product is dry at all times and keep the product away from water or any other liquid. Warning Make sure the local power supply voltage is the same as indicated on the nameplate on the back of machine. If the power cord is damaged, do not plug in or turn on the purifier. Email team@hathaspace.com. Do not block the air inlet or outlet with any objects.
Do not place the purifier under an air conditioning unit, or any place where water may drip onto it. Do not drop or hit the product, handle it gently. Do not operate this product while using flammable gas sprays such as insect repellent, and common household cleaning chemicals. 9 Do not use this product near gas appliances, heating devices, or near a stove. 10 Unplug the power cord when cleaning or changing filters. 11 Do not operate the purifier in a space where temperature changes are drastic.
TROUBLESHOOTING Problem No air comes out from the outlet Decreased Airflow Solution Check if purifier is on using the red power indicator on the display. Test outlet. The filters are dirty and they need to be cleaned or replaced. The filter packaging bag is not removed. Please remove the filter packaging bag. Air quality has not improved after running the purifier Make sure the filters are installed in the proper order and positioned correctly in the unit. Filters are worn out, please replace all the filters.