SIDEKICK TABLETOP SOCCER ASSEMBLY INSTRUCTIONS NG1028T3
THANK YOU! Thank you for purchasing this product. We work around the clock and around the globe to ensure that our products maintain the highest possible quality. However, in the rare instance that your product is defective or missing parts, contact your retailer, or call 800-759-0977, to submit parts requests or warranty claims. Please read the warranty information at the back of these assembly instructions for further details.
PARTS IDENTIFIER (NOT TO SCALE) #1 #2 BOLT FLAT WASHER 8 pcs #6 #3 HEX WRENCH #8 #12 SOCCER BALL 2 pcs #16 6 pcs #17 PLAYFIELD SUPPORT 2 pcs #9 3 pcs #18 CORNER 4 pcs 2 pcs #10 LEG 1 pcs #14 ORANGE PLAYER RODS TWO-PIECE GOAL PLAYFIELD 2 pcs #13 HAND GRIP 24 pcs END PANEL 2 pcs #5 1/2” SCREW 4 pcs SIDE PANEL 1 pcs #11 1-1/2” SCREW 8 pcs #7 #4 4 pcs #15 BLUE PLAYER RODS 3 pcs ROD END CAP 6 pcs #19 FOAM BUMPER 12 pcs PLASTIC ROD WASHER 12 pcs ADDITIONAL EQ
ASSEMBLY TIPS 1. Find a clean, level surface to begin the assembly of your game table. The table will be partially assembled upside down and then turned over onto its legs. This is a heavy game and turning it over will require at least two strong adults. 2. Remove all of the contents from box and verify that you have all of the parts shown on the Parts Identifier before you begin assembly. Note: Some parts may be pre-installed or pre-assembled. 3.
ASSEMBLY INSTRUCTIONS 1. Attach one SIDE PANEL #7 to the end of each END PANEL #8 by sliding one CORNER #17 down onto each end and securing with 1/2” SCREW #4. Note: The table is shown assembled upside down. #7 #17 #4 #8 2. Slide PLAYFIELD #9, with field markings face down, into the END PANEL grooves. Note: Playfield will also fit into grooves on both Side Panels once fully assembled. #7 #9 #8 3.
THANK YOU! ASSEMBLY INSTRUCTIONS (CONT.) 5. Attach two PLAYFIELD SUPPORT BRACE #16 underneath PLAYFIELD by fastening to SIDE PANELS with 1-1/2” SCREW #3. 6. Attach one LEG #10 to each corner of the table using BOLT#1 and FLAT WASHER #2. Carefully turn table over. 7. Attach HAND GRIP #12 to the marked end of each PLAYER ROD. Attach ROD END CAPS #15 to the opposite end of PLAYER RODS. 8. Attach one TWO-PIECE GOAL #5 to each end of the table with 1/2” SCREW #4.
CONGRATULATIONS! You have now assembled your Game Table. Please note the Care and Use instructions below to ensure years of trouble free use of your game table. CARE AND USE 1. This product is intended for INDOOR use only. 2. Do NOT sit, climb or lean on the table. 3. Do NOT drag the table when moving it as this will damage the legs.
180-DAY LIMITED WARRANTY This product is warranted to the original purchaser to be free from defects in material or workmanship for a period of 180 days from the date of the original retail purchase. This warranty does not cover defects or damage due to improper installation, alteration, accident or any other event beyond the control of the manufacturer. Defects or damage resulting from misuse, abuse or negligence will void this warranty.
PARTS LIST NG1028T3 Product # Description Parts Identifier No.
TABLE TOP FOOSBALL TABLE - NG1028T3 Parts List #10 #16 #4 #15 #19 #14 #18 #13 #2 #3 #9 #3 #12 #17 #8 #2 #1 #4 #5 #7 #11 #4 #4 #4 PARTS #5 NGP50973 #7 TOW-PIECE GOAL 2 pcs #13 * NGP50983 #8 SIDE PANEL 2 pcs #14 * ORG.