Use and Care Manual

ASSEMBLY TIPS

1. Find a clean, level surface to begin the assembly of your game table. We recommend

that two adults work together to assemble this game. You may want to carefully cut or tear

the four corners of the box so that the bottom of the box can be used as your work surface.

2. Remove all of the contents from box and verify that you have all of the parts shown on

Note: Some parts may be pre-installed

or pre-assembled.

understand the text before beginning each assembly step.

4. When installing parts that have more than one screw or bolt, hand tighten all

5. Electric screwdrivers may be helpful during assembly; however, please set a low torque

and use extreme caution because screws may be stripped or overtightened, resulting in

damaged parts, if the electric screwdriver’s torque is set too high.

WARNINGS!

READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.

CHOKE HAZARD - THIS TABLE CONTAINS SMALL BALLS AND PARTS

NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.