SURE SHOT DUAL ELECTRONIC BASKETBALL GAME ASSEMBLY INSTRUCTIONS NG2233BL
THANK YOU! Thank you for purchasing this product. We work around the clock and around the globe to ensure that our products maintain the highest possible quality. However, in the rare instance that your product is defective or missing parts, contact your retailer, or call 800-759-0977, to submit parts requests or warranty claims. Please read the warranty information at the back of these assembly instructions for further details.
PARTS IDENTIFIER (NOT TO SCALE) 1 2 NGP6020 x2 6 Tube 5 Ø22x755x580mm 9 10 NGP6028 14 18 22 NGP6040 26 NGP6041* 23 30 End Cap 24 NGP6041* 27 x6 M6 x 30mm Bolt 28 NGP6041* NGP6041* x2 x32 M6 x 35mm Bolt 31 NGP6041* NGP6041* x16 M6 x 20mm Bolt NGP6041* NGP6039 x2 Inflation Pump with Needle M6 x 48mm Bolt NGP6041* 20 NGP6038 x4 M6 x 42mm Bolt Control Box with Wire x1 M6 Washer x4 29 19 x64 Backboard NGP6035 x1 Switch Sensor NGP6041* x1 25 16 x2 Rim Support
PARTS IDENTIFIER (NOT TO SCALE) 33 NGP6041* 34 NGP6043 35 NGP6044 x2 x1 Allen Key x1 Ball Return Net Self-Stick Strap *Items included in Hardware Pack, NGP6041 PRE-INSTALLED PARTS A1 A3 A2 x2 Net A4 x2 x9 Spring Lock Plastic Pole Insert x2 Lock Pin For replacement parts please call 800-759-0977.
ASSEMBLY TIPS 1. Find a clean, level surface to begin the assembly of your basketball game. We recommend that two adults work together to assemble this game. You may want to carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface. 2. Remove all of the contents from box and verify that you have all of the parts shown on Note: Some parts may be pre-installed or pre-assembled. understand the text before beginning each assembly step. 4.
THANK ASSEMBLY YOU!INSTRUCTIONS FIG. 1 & 2 1. Attach Tubes 2 (#2) to Tube 3 and Tube 4 (#3 & #4) using spring lock (pre-installed) as shown in FIG.1. 2. Attach Tubes 7 (#7) to Tubes 8 (#8) using spring lock (pre-installed) as shown in FIG.2 2 3 X1 4 X1 7 X2 8 X2 FIG. 2 FIG. 1 X2 2 A2 Spring Lock 2 7 3 4 A2 Spring Lock 8 Punched hole FIG. 3 3. Attach Tube 5 and Tube 6 (#5 & #6) together using spring lock (pre-installed) as shown in FIG.3. 5 X1 6 X1 FIG.
ASSEMBLY INSTRUCTIONS (CONT.) FIG. 4 4. Attach Tube 5 and Tube 6 (#5 & #6) to Tube 3 and Tube 4 (#3 & #4) using Bolts (#26), Washers (#22) and Nuts (#28), and then attach Tube 5 and Tube 6 (#5 & #6) to Tubes 8 (#8) using Bolts (#26), Washers (#22) and Nuts (#28) as shown in FIG. 4, 4A and 4B. 5. Attach Tubes 7 and Tubes 8 (#7 & #8) to Tube 2 (#2) using Bolt (#24), Washers (#22) and Nuts (#28) as shown in FIG. 4C, repeat this step for other side. NOTE: Make sure the spring lock is facing down. FIG.
ASSEMBLY INSTRUCTIONS (CONT.) 1 X2 9 X2 12 X1 22 X8 24 X2 27 X2 28 X4 1 A3 1 2 1 2 12 22 28 FIG. 5 24 22 12 2 5 FIG. 5A 9 6 9 28 FIG. 5 6. Attach Tube 12 (#12) to Tubes 2 (#2) using Bolts (#24), Washers (#22) and Nuts (#28) as shown in Fig. 5A, and then insert Tubes 1 (#1) onto Tubes 2 (#2) as shown in FIG. 5. 7. Attach Tubes 9 (#9) to Tube 5 and Tube 6 (#5 & #6) using Bolt (#27), Washers (#22) and Nuts (#28) as shown in FIG. 5 and 5B 22 FIG.
ASSEMBLY INSTRUCTIONS (CONT.) 10 X2 11 X1 FIG. 6 11 A2 Spring Lock 10 11 9 Short 10 9 Long 10 FIG. 6 A2 Spring Lock 8. Attach Tubes 10 (#10) to Tubes 9 (#9) using spring locks (pre-installed), and then insert Tube 11 (#11) onto Tubes 10 (#10) using spring locks (pre-installed) as shown in FIG. 6.
THANK ASSEMBLY YOU!INSTRUCTIONS (CONT.) FIG. 7 9. Attach Rims (#17) and Rim Support Plates (#18) to the Backboard (#21) using the Bolts (#23), Washers (#22) and Nuts (#28). Attach the Switch Sensors (#15) to the Backboard (#21) using the Bolts (#23), Washers (#22) and Nuts (#28). NOTE: Make sure that you use washer on both sides of the backboard as shown in FIG. 7. 15 X2 17 X2 18 X2 21 X1 22 X 32 23 X 16 28 X 16 28 22 FIG. 7 18 21 17 18 28 15 22 22 15 22 23 23 17 FIG. 8 10.
ASSEMBLY INSTRUCTIONS (CONT.) FIG. 9 11. Slide elastic straps and sleeve of Ball Return Net (#35) onto Top Tubes 1 (#1) as shown in FIG. 9A & 9B. 12. Slide Tube 12 (#12) through the sleeve on the front of the Ball Return Net (#35), attach the left side first using Bolts (#24), Washers (#22) and Nuts (#28) as shown in FIG. 9C. Follow the same procedure on the right side. 12 X1 22 X4 24 X2 28 X2 35 X1 FIG.9A FIG.9B 35 FIG.9 12 35 11 28 12 28 24 22 24 FIG.
ASSEMBLY INSTRUCTIONS (CONT.) FIG. 10 13. With the help of another adult, attach the Backboard (#21) to Top Tubes 1 (#1) using Bolts (#25), Washers (#22), Nuts (#28) and End Caps (#20) as shown in FIG.10A. At each bottom hole of the backboard, attach the ramp tabs of Ball Return Net (#35) using Bolts (#25), Washers (#22), Nuts (#28) as shown in FIG.10B. 14. Connect the Lock Pins (#A4) to Tube 5 andTube 6 (#5 & #6) and insert them into Tube 5 and Tube 6 (#5 & #6) as shown in FIG.10C.
ASSEMBLY INSTRUCTIONS (CONT.) FIG. 11 15. Attach the Control Box (#16) to the middle of Tube 11 (#11) using two Bolts (#30) as shown in FIG.11A. 16. Run the rest of the Control Wire through the loops on the bottom side of the Ball Return Net (#35). Hold the Control Wire on Tube 11 (#11) using the Self-Stick Straps (#34) as shown in FIG.11. 16 X1 30 X2 34 X2 FIG.11 35 FIG.11A 16 11 30 Control Wire 11 34 FIG. 12 17.
ASSEMBLY INSTRUCTIONS (CONT.) FIG. 13 18. To fold game up when not in use, remove Lock Pins (#A4), fold the front of the basketball game up and re-insert Lock Pins (#A4) as shown in FIG.13. Note: The Lock Pins need to be removed before folding closed or open. FIG. 13 A4 Lock Pin IMPORTANT! Make sure to use the Lock Pin (#A4) when folded.
ASSEMBLY INSTRUCTIONS (CONT.) ELECTRONIC SCORER OPERATION Installing Batteries: Using a screwdriver, unscrew lid and open the battery box. Insert 3 “AA” batteries ( not included) in the order of polarity as shown on the inside cover. Close the cover and tighten screw. Turn the power ON using the ON/OFF switch. Reminders: • Batteries must be installed according to the correct polarization (+ and -) requirement. • Please clean the battery contacts, and also those of the device, prior to battery installation.
CHOOSE FROM 8 DIFFERENT GAME OPTIONS 1. Beat the Clock Press "PLAY" to enter game 1. Press "UP/Down" to select single/multiple players (P1/P2/P3/P4). Press "PLAY" after the number of players is selected. Press "UP/Down" to select playing time, 30/45/60 seconds. Press "PLAY" to begin the game. Scoreboard "HOME" shows Player 1, 3; Scoreboard "VISITOR" shows Player 2, 4. All shots worth 2 points until last 10 seconds, then each score counts 3 points.
CHOOSE FROM 8 DIFFERENT GAME OPTIONS 7. Left and Right Shoot Press "PLAY" to enter game 7. Press "UP/Down" to select single/multiple players (P1/P2/P3/P4). Press "PLAY" after the number of players is selected. Press "UP/Down" to select playing time, 30/45/60 seconds. Press "PLAY" to begin the game. Scoreboard "HOME" displays Player, "VISITOR" displays points Make a shot in "HOME" frame when LED is flasing on "HOME", 2 points scored display on “HOME”.
CONGRATULATIONS! You have now assembled your Basketball Game. Please note the Care and Use instructions below to ensure years of trouble free use of your game table. CARE AND USE 1. This product is intended for INDOOR use only. 2. Do NOT sit, climb or lean on the table. 3. Do NOT drag the table when moving it as this will damage the legs.
180-DAY LIMITED WARRANTY This product is warranted to the original purchaser to be free from defects in material or workmanship for a period of 180 days from the date of the original retail purchase. This warranty does not cover defects or damage due to improper installation, alteration, accident or any other event beyond the control of the manufacturer. Defects or damage resulting from misuse, abuse or negligence will void this warranty.