Instructions / Assembly

ON / OFF

CONTROL

WIRE /

CONTROL

CABLE

VISITOR

ELECTRONIC SCORER OPERATION

Installing Batteries:

Using a screwdriver, unscrew lid and open the

battery box. Insert 3 “AA” batteries ( not included)

in the order of polarity as shown on the inside

cover. Close the cover and tighten screw.

Turn the power ON using the ON/OFF switch.

Reminders:

• Batteries must be installed according to the

correct polarization (+ and -) requirement.

• Please clean the battery contacts, and also those

of the device, prior to battery installation.

• If the game will not be used for a long period of time,

we recommend that the batteries should be removed.

ASSEMBLY INSTRUCTIONS (CONT.)

WARNING:

1) Requires 3 “AA” batteries (not included).

2) Do not mix old and new batteries.

3) Do not mix alkaline, standard (carbon zinc), or

rechangeable (nickel-cadmium) batteries.

ON/OFF

PLAY

SELECT

DOWN

SOUND

PAUSE

RESET

CONTROL PANEL

CONTROL BOX OPERATION

Press "ON/OFF" to activate the scorer.

Scoreboard "HOME" shows "01" (pre- set game 1).

Press "SELECT UP and DOWN" to select a game.

Press "PLAY" to enter selected game mode.

Press "SOUND" to switch sound ON/OFF while playing.

Press "PAUSE" to pause or start time counting.

Press and hold the button "ON/OFF" 3 seconds to turn off scorer.

Press and hold the button "RESET" 3 seconds to reset the games.

NOTE: If no shot is made or no button is pressed in 15 mins,

scorer will be turned off automatically.