Instructions / Assembly

8
THANK YOU!ASSEMBLY INSTRUCTIONS - CHAIR
1. Insert CASTERS #25 into BASE #17. Attach SEAT LIFT #18, BASE CAP #19 and
LIFT COVER #20 to BASE #17.
2. Attach SEAT ADJUSTER #21 to the bottom of SEAT #16 with BOLT #22, LOCK WASHER #23
and FLAT WASHER #24. Note: The tilt tension dial should face towards the front of the chair.
3. Attach assembled SEAT to assembled BASE - top of SEAT LIFT fits into corresponding hole
in SEAT ADJUSTER.
25