Use and Care Manual

ASSEMBLY TIPS

1. Find a clean, level surface to begin the assembly of your game table. The table will be par-

tially assembled upside down and then turned over onto its legs. This is a heavy game and

turning it over will require at least two strong adults.

2. Remove all of the contents from box and verify that you have all of the parts shown on the

Note: Some parts may be pre-installed or pre-

assembled.

stand the text before beginning each assembly step.

5. Electric screwdrivers may be helpful during assembly; however, please set a low torque

and use extreme caution because screws may be stripped or overtightened if the electric

screwdriver's torque is set too high.

WARNINGS!

READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.

CHOKE HAZARD - THIS TABLE CONTAINS SMALL PARTS - NOT SUITABLE FOR CHILDREN UNDER

3 YEARS OF AGE.

4. When installing parts that have more than one screw or bolt, hand tighten all screws or

bolts in place before ﬁnishing tightening with screwdriver or hex wrench.