Instruction Manual

4
Section IV. ADJUSTABLE TRIGGER
Your air rifle is equipped with a 2-stage adjustable, (Fig. 3). You can adjust the “trigger travel” & “trigger pull” as
follows:
SCREW#1 is for trigger pull force adjustment. For less trigger pull force prior to discharge, rotate SCREW#1 clock-
wise; and vice versa.
SCREW#2 is for trigger travel adjustment. For less trigger travel prior to discharge, rotate SCREW#2 clockwise; and
vice versa.
NOTE: Make only small changes to one adjuster at a time. Over-adjusting can render the trigger inoperable and may
create a dangerous situation!
Fig. 3
Section V. COMFORT ADJUSTMENTS
Comb Adjustment: Air rifle is supplied with 2 different height combs. Simply pull back the comb on the stock and
slide in the other. (Fig. 4 & Fig. 5)
Fig. 4
Fig. 6
Fig. 5
Fig. 7
Stock Length of Pull Adjustment: The butt pad is adjustable for length of pull. Simply loosen the 2 screws locat-
ed on the right side of the stock and adjust the butt pad suitable to your reach. Then tighten the screws so the pad
becomes solid. The screws can be adjusted with a suitable screw driver or with a coin. (Fig. 6 & Fig. 7)
Butt Pad Adjustment: The butt pad is adjustable for height and it rotates slightly, providing you the
perfect height and angle of the butt pad. In order to adjust the butt pad, simply loosen the bolt in the butt pad with a
suitable hex wrench; and raise or lower it according to shooting preference. Then tighten the bolt. (Fig. 6 & Fig. 7)
Screw#1Screw#2