Instruction Manual

Section III. Automatic Safety & Anti Bear-Trap Mechanism

Your air pistol is equipped with automatic safety and anti bear-trap mechanism. Automatic safety sets the safety to

“ON” automatically during cocking of the air riﬂe. Anti bear-trap mechanism prevents the safety button being put to

“OFF” position when the barrel is broken. Automatic safety & anti bear-trap mechanism together prevents accidental

pull of the trigger when the air riﬂe is cocked, so preventing undesirable charges which may cause damage.

Section IV. Quattro Trigger

Your air riﬂe is equipped with Quattro trigger, (Fig. 3), you can adjust “trigger

travel” & “trigger pull” as follows:

BOLT#1 is for trigger pull force adjustment.

For less trigger pull force prior to discharge, rotate BOLT #1 clockwise; and vice

versa.

BOLT#2 is for trigger travel adjustment.

For less trigger travel prior to discharge, rotate BOLT #2 clockwise; and vice versa.

Section V. Micro Adjustable Rear Sight &

Front Sight

The rear-sight is a sensitive device and can be adjusted both

for elevation and windage by steps of 0.1mm, meaning 1mm

deviation when shooting to a target 10m away.

Windage adjustment

• If the shot is deﬂected to the left of the target, turn the

KNOB#1 clockwise. (Fig. 4)

• If the shot is deﬂected to the right of the target, turn the

KNOB#1 counter-clockwise. (Fig. 4)

Elevation adjustment

• If the shot is too high, turn KNOB#2 clockwise. (Fig. 4)

• If the shot is too low, turn KNOB#2 screw counter-clockwise. (Fig. 4)

Further elevation adjustment is possible by means of the

adjustable front sight.

• If the shot is too high, turn KNOB#3 clockwise. (Fig. 5)

• If the shot is too low, turn KNOB#3 counter-clockwise. (Fig. 5)

Fig. 3

BOLT#2

BOLT#1

Fig 4

KNOB#1

KNOB#3

KNOB#2

Section VI. Operation Instructions

Cocking the gun: Hold the pistol grip with one hand and break the barrel all the way down with the other hand

(Fig. 6 & 7).

Fig. 6 Fig. 7

Fig 5