Manual

DOC101200-2_AIPC_API_Registers_SMBus_Linux[1].docx - rev 03 – 2013-12-03 - Created by:6923
Page 5 of 6
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: [phone] - [e-mail] - www.hatteland-display.com
All intellectual properties belong to Hatteland Display AS
Device Address
Command
Base R/#W
Register
Address
Input Data Numb
er of
output
bytes
ALARM_RESET 0x48 0 0x24 0x00 -
ALARM_FAULT_TEST 0x48 0 0x25 0x00 -
ALARM_SOUND_OFF 0x48 0 0x26 0x00 -
ALARM_ACK 0x48 0 0x27 0x00 -
IO_STATUS_RETURN 0x48 1 0x28 - 1
IO_STATUS_RETURN 0x48 0 0x28 0xXX -
ERROR_LED_EN
1) Read IO_STATUS_RETURN 0x48 1 0x28 - 1
2) Bit 0 shall be set to 1. Rest of the
bits same value as output from 1).
0x48 0 0x28 0xXX
(Bit 0=1)
-
ERROR_LED_DIS
1) Read IO_STATUS_RETURN 0x48 1 0x28 - 1
2) Bit 0 shall be set to 0. Rest of the
bits same value as output from 1).
0x48 0 0x28 0xXX
(Bit 0=0)
-
K1_EN
1) Read IO_STATUS_RETURN 0x48 1 0x28 - 1
2) Bit 1 shall be set to 1. Rest of the
bits same value as output from 1).
0x48 0 0x28 0xXX
(Bit 1=1)
-
K1_DIS
1) Read IO_STATUS_RETURN 0x48 1 0x28 - 1
2) Bit 1 shall be set to 0. Rest of the
bits same value as output from 1).
0x48 0 0x28 0xXX
(Bit 1=0)
-
HS_EN
1) Read IO_STATUS_RETURN 0x48 1 0x28 - 1
2) Bit 2 shall be set to 1. Rest of the
bits same value as output from 1).
0x48 0 0x28 0xXX
(Bit 2=1)
-
HS_DIS
1) Read IO_STATUS_RETURN 0x48 1 0x28 - 1
2) Bit 2 shall be set to 0. Rest of the
bits same value as output from 1).
0x48 0 0x28 0xXX
(Bit 2=0)
-
BUZZER_EN
1) Read IO_STATUS_RETURN 0x48 1 0x28 - 1
2) Bit 3 shall be set to 1. Rest of the
bits same value as output from 1).
0x48 0 0x28 0xXX
(Bit 3=1)
-
BUZZER_DIS
1) Read IO_STATUS_RETURN 0x48 1 0x28 - 1
2) Bit 3 shall be set to 0. Rest of the
bits same value as output from 1).
0x48 0 0x28 0xXX
(Bit 3=0)
-
Device Address
Command
Base R/#W
Register
Address
Input
Data
Number of
output
bytes
BACK_LIGHT_ADJUSTMENT 0x48 1 0x11 - 1
BACK_LIGHT_ADJUSTMENT 0x48 0 0x11 0xXX
[0-255]
BACK_LIGHT_PWM 0x48 0 0x15 0xXXXX
[0-
60000]