Manual
11
IND100077-138
Product Labeling
Introduction
This section details the locations, content details and specications for factory mounted labels for all currently
available standard Hatteland Display Maritime Multi Display (MMD) - Series 1 models. This information will in most
cases also apply for most Customized Models as well, but may differ based on customer requirements, in that case,
please refer to the customized User Manual (paper or electronic version, dependent on customer requirements).
Label Size and Types
ID Label Layout Description Specication
Manufacturer: Product: 100W 115VAC/60Hz
Hatteland Display 19,0 Inch 230VAC/50Hz
NORWAY TFT
Date: 20110526
Serial Number:
JH 19T14 MMD-AA1-AAAA-000256
Type : Serial Number Label
Name : Label D
Size : 75mm wide x 60mm high (square size)
Note: Text content of label will match specications
derived from Data Sheet.
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Barcode type: CODE128 (used extensively world wide in shipping and packaging
industries. The symbology was formerly dened as ISO/IEC 15417:2007.)
Type : Touch Screen Label
Name : Label B
Size : 60mm wide x 22mm high (rectangle size)
Note: Only present if Touch Screen was part of factory
option order.
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Note: Content on label will vary based on Touch Screen type and/or Touch Screen
Controller. Label shown to the right is for illustration purposes only!
Type : Warranty Label
Size : 30mm wide x 23mm high (oval size)
Tampering proof sticker with glue
on back.
Type : Quality Control (QC) Label
Size : 30mm wide x 23mm high (oval size)
Ordinary sticker with glue on
back.