Manual

44
User Controls
IND100064-21
Display / Picture / Picture Info / Main Source
Please note that a valid input signal must be present for this function to work.
This function will show the picture information as detected by the display controller such as Physical Port
Input Name, Current Signal Resolution, H-Freq. (horizontal frequency) and V-Freq. (vertical frequency).
It will not perform any changes or adjustments to the display settings and signals.
● When selected, a box icon (
▀
) will indicate that the selected function has been activated.
Display / Picture / Picture Info / Second Source
Please note that a valid input signal must be present for this function to work.
This function will show the picture information as detected by the display controller such as Physical Port
Input Name, Current Signal Resolution, H-Freq. (horizontal frequency) and V-Freq. (vertical frequency).
It will not perform any changes or adjustments to the display settings and signals.
● When selected, a box icon (
▀
) will indicate that the selected function has been activated.
Display / Picture / Auto Setup
Function only available when analog VGA/RGB signal are set as Main Source.
This function will try to re-negotiate with the current signal input and its specications like frequency etc.
to perform an auto-adjusting on screen to correct aspect ratio, centered on screen, re-negoiate
phase/frequency (for analog signals). All signal inputs and image adjustments will be reset. It will not reset
any conguration done for the OSD Menu overlay and various other user settings. This function can be
used in cases where you suspect a faulty or unsuitable conguration of the unit is present. It can also be
used in trouble-shooting situations to determine that the display are not or are the reason for a faulty or
undesirable operation. The problem may be from external equipment.
● Press the right (►) button to activate. A conrmation requester will appear. Use +/- to conrm.
Display / Setup / OSD Settings / Language
This function will choose the default language to use in all OSD menu/text/messages for the entire display
controller software. Available languages may be: English (default), Norwegian, Chinese (simplied), French,
Spanish and Japanese. Please note that the manufacturer’s user manual is currently only in English.
● When selected, a box icon (
▀
) will indicate that the selected function has been activated.
Display / Setup / OSD Settings / OSD Timeout (sec)
Increase/decrease the timeout period in seconds for the OSD Menu overlay to automatically disappear
without the user having to manually exit from the OSD menu.
● Level adjusts from 5-30 seconds. 20 is default.
Display / Setup / OSD Settings / Transparency
Increase/decrease the alpha blend also known as transparency of the OSD Menu overlay. It means
that all signals inputs and PIP/PBP images show through the OSD Menu. It is used when important
information on the display is neccessary to be visible at all times. A black border around the OSD menu
layout will always be black and is not affected by this adjustment.
● Level adjusts from 0-100 steps. 50 is default.
OSD Menu Functions