Manual

User Controls

IND100064-21

Display / Setup / OSD Settings / OSD Horz Position

Move the horizontal (left/right) position of the OSD Menu overlay. The OSD Menu can only be moved within

the max display area available.

● Level adjusts from 0-100 steps. 100 is default.

Display / Setup / OSD Settings / OSD Vert Position

Move the vertical (left/right) position of the OSD Menu overlay. The OSD Menu can only be moved within

the max display area available.

● Level adjusts from 0-100 steps. 100 is default.

Display / Setup / OSD Settings / Full Menu

Function only available through password protection.

If the current OSD Menu is in Simplied mode, you may gain access to all the functions again with

the following procedure: Press the right (►) to activate the function, now a requester will appear with 3

digits shown as:

0 0 0

To enable the OSD Menu to appear in Full Menu mode, please change the 3 digits to:

1 5 8

and press the right (►) to conrm. Now all the Menu functions will be accessible. When you power off the

product, this setting will be reverted back to Simplied mode.

Note: To force the OSD Menu to appear in Full Menu Mode always, you must rst unlock the OSD Menu

with the procedure as described and then go to the [ Display / Setup / OSD Settings / OSD Mode / Full ]

and make sure that setting is activated, see below.

Display / Setup / OSD Settings / OSD Mode / Simplied - May be set as factory default

Function only available in “Full” menu mode.

Force the OSD Menu to always appear in Simplied Mode (even after power shutdown of the unit). This

means that a lot of advanced functions is not accessible from the OSD Menu. This is to prevent changes

to the display that could impact on display functionality and image quality. Only experienced and qualied

personnel should access and change this OSD Mode setting.

● When selected, a box icon (

▀

) will indicate that the selected function has been activated.

Display / Setup / OSD Settings / OSD Mode / Full - May be set as factory default

Function only available in “Full” menu mode.

Force the OSD Menu to always appear in Full Mode (even after power shutdown of the unit). This means

that a lot of advanced functions is accessible from the OSD Menu. Only experienced and qualied

personnel should access and change this OSD Mode setting. This is the factory default setting.

● When selected, a box icon (

▀

) will indicate that the selected function has been activated.

OSD Menu Functions