Manual
62
IND100129-117
All specifications are subject to change without prior notice!
Specications - JH 23T14 MMD-xxx-Axxx (LED version)
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
2/2
Available factory standard cables, 30cm [11.81"] in length.
• VSD100692-1 : 1 x 9P D-SUB (female) - RS-232 (COM1)
• VSD100692-3 : 1 x 9P D-SUB (female) - RS-232 (COM1)
: 1 x 9P D-SUB (female) - RS-232 (COM Touch Screen)
: 3 x BNC (female) (Composite Video in)
• VSD100692-4 : 1 x 9P D-SUB (female) - RS-232 (COM1)
: 3 x BNC (female) (Composite Video in)
Customized cables are possible to support more built-in signals, like: RS-485, RS-422/
RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls,
Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths
can be manufactured.
• High Quality TFT with LED Backlight Technology
• 23.1 inch viewable image size
• TFT active-matrix liquid crystal panel
• MVA (Multi-domain Vertical Alignment) LCD Technology
Sync Signal:
• Digital separate synchronisation
• Composite synchronisation
• Synchronisation on green.
• Auto detects VGA -> WUXGA, interlaced and non interlaced
• Video Signal : Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronisation Range:
• Horizontal : 15,0 kHz to 91,1 kHz
• Vertical : 60 Hz* to 85 Hz
* Recommended for optimum picture quality
• Pixel Number : 1600 x 1200
• Pixel Pitch (RGB) : 0.294 (H) x 0.294 (V) mm
• Response Time : 12ms (typ) black-white-black or 8ms gray to gray
• Contrast Ratio : 600:1 (typical)
• Light Intensity : 400 cd/m2 (typical)
• Viewable Angle : +/- 85 deg. (typical) (Up/Down/Left/Right)
• Active Display Area : 470.4 (H) x 352.8 (V) mm
• Max Colors : 16.7 millions
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200*
• WUXGA : 1920 x 1200
* Recommended for optimum picture quality. (60 Hz only)
Video Signals (with Multifunction Cable):
• Interlaced NTSC and PAL/SECAM video
• Composite video
• 584 (W) x 534 (H) x 85 (D) mm - 22.99" (W) x 21.02" (H) x 3.35" (D)
• Weight: 18 kg
• Cables = Custom Multifunction Cable to support more signals
• JH 23TBR T01-A1 = Bracket (See user manual)
• JH 23BRD STD-A1 = Mounting Bracket EN6095 Tested (See manual)
• JH MMDRO STD-A1 = Rotary Bracket (See user manual)
• JH 23TSV STD-A1 = Sun Visor (See user manual)
• JH 23VED STD-A1 = Vesa Bracket (See user manual)
• JH 23TWC STD-A1 = Water Cover (See user manual)
• Operating : Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
• IP Rating : Protection (EN60529): IP66 front - IP20 rear
• Compass Safe Dist.
: JH23T14MMD-xxx-xxxx - Std: 1.60m Steering: 1.05m
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Multi-power Supply:
• 115&230VAC - 50/60Hz + 24 VDC - JH 23T14 MMD-Mxx-xxxx
Note: You may connect either AC power or DC power or both. In case both sources
are connected, power will be sourced from the AC input. If AC input is lost, there will
be a uninterrupted switch-over to DC input.
Power Consumption:
Operating : 95W (TYP) - 125W (MAX)
• DVI-I Signal IN : 1 x 29p DVI Female (or as RGB IN with adapter)
• RGB Signal IN : 1 x 15p HD D-SUB (female)
• RGB Signal OUT : 1 x 15p HD D-SUB (female) - Clone of RGB IN**
• Multifunction : 1 x 160p D-SUB (female) - Also see table below
• USB I/O : 1 x TYPE B Conn. (female) Reserved for future use
• AC Power IN : 1 x Std IEC Inlet
• DC Power IN : 1 x 2p D-SUB Connector (male) - Amphenol FCC17
• AC Power OUT : 1 x Std IEC Outlet (5A Max)
**Tested at recommended resolutions. The RGB output signal is at same resolution
and sync as the RGB input. The output is working even if the display unit is turned off,
but power cable/supply must be connected/provided.
On front bezel - Keypad control (IP66) xxx-xxAx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (up/down - push buttons)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
On front bezel - Potmeter control (IP66) xxx-xxBx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (rotary control)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
• Speaker / Buzzer
• Capacitive Touch Screen / Optical Bonding Technology
• Color Calibrated models (ECDIS)
TFT Technology:
Synchronisation:
TFT Characteristics:
Supported Signals:
Physical Considerations:
Available Accessories:
Environmental Considerations:
Power Specifications:
Signal Terminals:
User Controls:
T E S T I N G / A P P R O V A L S & C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) ClassNK - Nippon Kaiji Kyokai GL - Germanischer Lloyd DNV - Det Norske Veritas
ABS - American Bureau of Shipping BV - Bureau Veritas LRS - Lloyd’s Register of Shipping EU RO MR - Mutual Recognition
CCS - China Classification Society
*Note that all 23 inch with touch screens are by factory default delivered with bonding.
Factory Options:
Multifunction Cable:
For a full overview, please review our typenumber sheet found on our website:
http://www.hatteland-display.com/pdflink/ind100780-1.php