Instruction Manual

Serial/Ethernet Communication (SCOM) Interface

IND100084-14

"BRI" - Backlight Minimum Value

Set the backlight minimum value. Range from 0x00 to 0xFF (0% - 100%).

Example:

Command to set 50% Brightness:

0x07 0xFF 0x42 0x52 0x49 0x01 0x1B 0x80 0x7F

"BRL" - Set LED Glass Display Control™ (GDC) Brightness

Set the backlight intensity for the Glass Display Control™ (GDC) LED's on the front glass. From 0x00 to 0x31 (0% -

100%). The brightness value shall be sent as 1 byte in the DATA eld. A setting of 0x00 shall indicate off. A setting of

0x31 shall indicate maximum brightness. You can send "?" to retrieve the current value/status of the LED's.

Example:

Command to set 60% intensity:

0x07 0xFF 0x42 0x52 0x4C 0x01 0x18 0x32 0xCD

"BRM" - Backlight Maximum Value

Set the backlight maximum value. Range from 0x00 to 0xFF (0% - 100%).

Example:

Command to set 60% Brightness:

0x07 0xFF 0x42 0x52 0x4D 0x01 0x17 0x99 0x66