Instruction Manual

30
Serial/Ethernet Communication (SCOM) Interface
IND100084-14
MCC Command Syntax and Functionality Details and Values
Set IP Address (xed or auto)
Note:
By sending this command, the
communication mode will be
automatically set to "Ethernet",
in the "Communication Mode",
referenced earlier in this chapter.
In addition, a power off/on to
the unit is required to reboot the
internal network code and utilize
the newly set IP address. This
can either be done by issue the
"Power down / up" command
described earlier in this table or
do a physical power off/on for
the unit.
This command is not available
on STD units.
Syntax : 07 FF 4D 43 43 10 16 BC v1 v2 v3 2E w1
W2 W3 2E x1 x2 x3 2E y1 y2 y3 zz
Function Examples:
Example xed IP 192.168.1.35, Send:"192.168.001.035":
07 FF 4D 43 43 10 16 BC 31 39 32 2E 31 36 38 2E 30 30
31 2E 30 33 35 55
Set Auto IP "A" : 07 FF 4D 43 43 02 24 BC 41 02
Set Auto IP "a" : 07 FF 4D 43 43 02 24 BC 61 E2
Where v1 = "0" to "2"
Where v2 = "0" to "9"
Where v3 = "0" to "9"
Where w1 = "0" to "2"
Where w2 = "0" to "9"
Where w3 = "0" to "9"
Where x1 = "0" to "2"
Where x2 = "0" to "9"
Where x3 = "0" to "9"
Where y1 = "0" to "2"
Where y2 = "0" to "9"
Where y3 = "0" to "9"
Where 2E = "." (dot)
Where zz = Calculated Checksum
or
Where v1 = "a" or "A" (Auto IP)
Where zz = Calculated Checksum
Available response status:
"0" = Fail
"1" = Successful
Auto Position
Note:
PC mode only.
Send Only : 07 FF 4D 43 43 01 25 C3 3C
Available response status:
"0" = Fail
"1" = Successful
Auto Color Balance
Send Only : 07 FF 4D 43 43 01 25 C5 3A
Available response status:
"0" = Fail
"1" = Successful
OSD Outdoor Mode
Syntax : 07 FF 4D 43 43 02 24 CA xx zz
Function Examples:
Example "1" : 07 FF 4D 43 43 02 24 CA 31 04
Where xx = "0" to "1"
Where zz = Calculated Checksum
Available functions:
"0" = No delay for all touch
buttons, except 2 sec delay
for "MENU"
"1" = Delay 5 seconds for all touch
buttons
Burn In
Syntax : 07 FF 4D 43 43 02 24 CC xx zz
Function Examples:
Example "1" : 07 FF 4D 43 43 02 24 CC 39 0B
Query "?" : 07 FF 4D 43 43 02 24 CC 3F F4
Reset "R" : 07 FF 4D 43 43 02 24 CC 52 E1
Reset "r" : 07 FF 4D 43 43 02 24 CC 72 C1
Where xx = "0" to "1"
Where zz = Calculated Checksum
Available functions:
"0" = Normal Mode
"1" = Burin In Mode
Test Pattern
Syntax : 07 FF 4D 43 43 02 24 CD xx zz
Function Examples:
Example "1" : 07 FF 4D 43 43 02 24 CD 31 01
Where xx = "0" to "1"
Where zz = Calculated Checksum
Available functions:
"0" = Normal Display
"1" = Display built-in Test Pattern
Reset Factory Default
Send Only : 07 FF 4D 43 43 01 25 CE 31
Available response status:
"0" = fail
"1" = successful
Save User Default
Note:
Available function list differs
between MMD and STD units!
Syntax : 07 FF 4D 43 43 02 24 D7 xx zz
Function Examples:
Example "3" : 07 FF 4D 43 43 02 24 D7 33 F5
Where xx = "1" to "5"
Where zz = Calculated Checksum
Available functions (MMD):
"1" = User1 Slot
"2" = User2 Slot
"3" = User3 Slot
"4" = User4 Slot
"5" = User5 Slot
Available functions (STD):
"1" = User Slot
Available response status:
"0" = Fail
"1" = Successful