User Manual

UNIVERSAL REMOVABLE REAR CROSSBAR
CONVERSION INSTRUCTIONS FOR HAULER RACK II
& SERVICE BODY SERIES RACKS
T11U2863-1 shown above
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31
st
Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 1 of 8 WWW.HAULERRACKS.COM
Package Contents:
(2) ‘Y’ BRACKETS
(8) 3/8”-16 x 2” CARRAIGE BOLTS
(4) 3/8”-16 WING NUTS
(4) 3/8” x 1-3/4” LOCKING LYNCH PINS
(4) 3/8" INTERNAL TOOTH WASHERS
(8) 3/8”-16 NUTS
(8) 3/8” SPLIT LOCK WASHERS
Before you begin:
Remove all components from the shipping carton.
The rack should be assembled on a padded surface such as carpet to prevent scratching of aluminum surfaces. Remove bands
securing components together.
Read the instructions thoroughly to familiarize yourself with the assembly sequence.
Gather the following tools used to assemble and install the rack.
9/16” Sockets or open end wrenches
3/8” Drill bits and drill
Saw with blade for cutting aluminum or carbide toothed blade for circular saw
Pencil or marker
Center punch and hammer (optional)

Summary of content (8 pages)