User Manual

1. ‘Y’-Bracket placement
On the rear crossbar, place the ‘Y’ bracket onto to the “T’ bracket as shown. Mark the inside edges of
the ‘Y’ bracket onto the crossbar. Repeat for other side.
Remove the rack from the truck or support the side rails just in front of the rear legs.
2. HD Brace removal from rear crossbar
Remove the rack from the truck or support the side rails just in front of the rear legs.
Unbolt the HD brace from the rear crossbar and loosen nut on leg. Slide the HD brace down the leg.
Repeat for other side.
Mark here & other side
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31
st
Avenue North Phone: [phone]
Minneapolis, MN 55427-2848 Fax: [phone]
Page 2 of 8 WWW.HAULERRACKS.COM