User Manual

4. Cutting the crossbar
Remove the (4) 3/8”-16 nuts and (4) 3/8” lock washers holding the ‘T’ bracket to the rear crossbar.
Remove the ‘T’ bracket. Repeat for other side.
Remove the (8) 3/8”x 1” hex head bolts from the outer channels and (2) 3/8”-16 x 1-1/2” hex head bolts
from center channel of the rear crossbar.
Using a saw, cut out the marked areas on the crossbar. Repeat for other side.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31
st
Avenue North Phone: [phone]
Minneapolis, MN 55427-2848 Fax: [phone]
Page 4 of 8 WWW.HAULERRACKS.COM