Thank you for choosing Haunted Hill Farm! Valuable feedback like yours helps us make our products even better and helps other potential customers on their shopping journey! If you’re fully satisfied, we would love for you to leave us a review where you purchased the product. If you have any questions, concerns or suggestions, please contact us directly. Our team is here to help! boo@HauntedHillFarm.
The model number of your item is printed on the side of your carton. Always use this number to identify your item. Thank you for your purchase of this quality Halloween decor. With proper use and care, your Halloween decor will provide you with years of enjoyment. Please follow the instructions on how to assemble and disassemble your item. If you should have any problems with your item, or you have any questions, DO NOT return it to the place of purchase.
ASSEMBLY INSTRUCTIONS Please note: Make sure to add batteries to the battery pack prior to assembly for easier access (batteries not included). Your package includes: METAL STAND (1), FABRIC STAND COVER (2), SNAP LOCK POLES (3), WAIST BRACKET AND MODULE (4), LEFT ARM (5), RIGHT ARM (6), HEAD AND CAPE (7), GIRL BODY AND FOG HOSE (8), 6V 2A ADAPTER (9), FOG BRACKET (10), FOG CORD (11), FOG CORD ADAPTER (12), FOG DIFFUSER (13) 1.
. Lower the HEAD AND CAPE onto the WAIST BRACKET AND MODULE. (Match G to G) 5. Reach inside the sleeve on the CAPE and insert the RIGHT ARM into the center snap-lock post below the shoulders. (Match H to H) 6. Reach into the sleeve on the CAPE on the opposite side and insert the LEFT ARM into the center snap-lock post below the shoulders. (Match I to I) 7. Insert the Snap-lock on the hand of the RIGHT ARM into the shoulder of the GIRL BODY AND FOG HOSE. (Match J to J) 8.
11. Attach the two hook and loop fasteners on both sides of the HEAD AND CAPE to the Soul Sucker’s hand and dress on the GIRL BODY AND HOSE. 12. Lift the cape and connect the wires labeled, L,M, and N. (Match L to L) (Match M to M) (Match N to N) 13. For optimal fog function during high wind or windy weather, insert the Fog Diffuser with the tapered end upward into the mouth of the GIRL BODY AND FOG HOSE. 14.
1. Attach fog hose from underneath the cape to the FOG BRACKET. Your fog hose will click and secure in place over the raised surface rings of the FOG BRACKET. (see Illustration A) Depress the lever arms of the FOG BRACKET and attach to the fog machine nozzle. (see Illustration B) 2. Plug the FOG CORD into your fog machine. If the fog cord plug does not fit, see illustration 2A. 2A. Plug the FOG CORD into the FOG CORD ADAPTER. Plug the FOG CORD ADAPTER into your fog machine. 3.
TROUBLESHOOTING To adjust the head angle and fog direction, loosen the set screw on the neck bracket located beneath the shoulder assembly on the girl figure. 1. Start with the girl’s body and Soul Sucker’s arms in the UP position. The girl’s head will be closer to the Soul Sucker’s face. 2. Turn the screw counter clock-wise to loosen the set screw. 3. Gently rotate the head and shoulder assembly to optimize the head angle and fog direction.
TROUBLESHOOTING AND FAQ Q: My animatronic is not turning on: A: Check the battery pack connection. Ensure all batteries are attached and battery pack cover is secure. Check to make sure the power switch is turned on. Q: My figure is not lighting up A: If your figure has a light component, check the wires on the inside of the body to make sure all plugs are properly secured. Once secured, please check the battery back and on/off switch to make sure both are on/attached.
IMPORTANT SAFETY INSTRUCTIONS Warnings 1) This product is for indoor or covered outdoor use only. Do not place in direct sunlight. 2) This product is for decoration only and is not a toy. Small parts and choking hazard. Use caution with children under the age of 14. 3) Do not position the decoration near candles, sources of heat, or in direct sunlight. 4) The decoration cannot be connected to the power supply directly.
1-Year Limited Warranty “Limited” Warranty Program For a period of one (1) year after purchase, Haunted Hill Farm (“Manufacturer”) will either repair or replace defective components in accordance with this Limited Warranty. Sales and use taxes, plus shipping and handling charges are the responsibility of the consumer.