User's Manual

29
Channel Scan for Analog TV (Cable or Antenna) | Hauppauge Computer Works 2020
As TV channels are found, they will appear in the Channel box. When finished, click Next to
save the channels to the database.
If you are using a set top box or dta box from a cable or satellite company, you need the
broadcast channel. Normally this is Cable 3 or 4. Once found you can stop the scan and click
next to finish the setup.
Manual Entry
Select Manual Entry to manually enter analog channels. You can shorten the channel scan if you
know the channel numbers for your local station.
Enter the channel number into the "Number" field, and a channel name into the "Name" field.
Then click on Add. The channel is added to the list. You can repeat this procedure with other
channels.
When done, click Next to save the channels to the database.