Model UC-PS10SS-30
Table of Contents Safety Information.................................... 2 Warranty Information............................... 3 Specifications............................................ 4 Parts Included........................................... 4 Tools Needed........................................... 4 Satisfied With It........................................................ 2. Jack Up the Hood................................................... 3. Screw It Into Place....................................
D. You can fight the fire with your back to an exit. 4. Two to three installers are recommended because of the larger size and weight of this hood. *Based on "Kitchen Fire Safety Tips" published by NFPA. CAUTION 1. For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors. 2. To avoid damage and noisy and/or unbalanced impellers, keep drywall/construction dust, etc. off power unit. 3.
Specifications Dimentions UC-PS10SS-30 29.75” W 21.
Preparation: What to Do Before Installation Before installing your range hood, carefully follow these steps: 1. Read This Manual Read through all the steps. If you fail to read the instructions carefully, we will not be responsible for damages incurred on your part. If you’re not confident in your abilities to install the range hood properly, we recommend hiring a certified technician to complete the installation.
Preparing the Cabinet Cabinet with recessed bottom Cabinet or soffit with flush bottom 30” cabinet (typical) 30” cabinet (typical) Cabinet with recessed bottom Cabinet with flush bottom 1 1 7”x7” Opening 4-3/4” 7”x7” Opening 1” hole 12-3/4” 4-3/4” 1” hole 12-3/4” 2” 2” 2” 2” 3-1/8” 3-1/8” Four, (4) mounting holes 2 1-7/8” Four, (4) mounting holes 1-7/8” 26” 3” 7”x7” Opening 26” 4-1/4” 1” hole 12-3/4” 2” 2” 3-1/2” wide filler along front and sides 3” 7”x7” Opening 4-1/4” 1
How to Install Your Range Hood When you’ve completed all the preparation steps, you’re ready to install your range hood. 1. Thoroughly Inspect the Unit and Ensure You Are Satisfied With It Check your range hood for damaged or missing parts. Plug it in to an outlet to ensure the fan and lights work. If anything is damaged or missing, contact the manufacturer to get the issues solved. Don’t throw away packaging until you’re sure you are fully satisfied with the product.
6. Plug the Range Hood In Plug the power cable into an outlet. 6. Reinstall Baffle Filters Reinstall the three baffle filters. 7. Keep This Manual Put this manual in a safe place and keep for further reference. How to Use Your Range Hood Now that your range hood is installed, it’s time to learn how to use it. It is very simple to use and is operated entirely using the front control panel.
Basic Maintenance Instructions Your range hood requires some easy routine maintenance to keep it running efficiently. Maintaining the Lighting This range hood uses two lamps of 2W. Maintaining the Baffle Filter Clean the grease filters frequently—we suggest cleaning every 2 weeks. For your convenience, the filters are dishwasher safe! 1. Turn off power or unplug the range hood before removing bulbs. 1. Remove all three baffle filters by pulling the levers and slowly taking the filters down. 2.
Troubleshooting Tips WARNING: Please turn off the power circuit or power breaker panel before troubleshooting this range hood. Failure to do so can cause death or serious injury. Problem My range hood won’t work. My range hood vibrates while the fan is operating. The fan is operating weakly. The fan is not working properly even though the lights are working. The vent hood is not working efficiently. The light is not working. Solution 1. Make sure the power supply and wiring are connected securely. 2.
Contact Hauslane Extended Warranties If you are interested in an extended warranty, sign up on our website at www.hauslane.com Parts and Accessories If you need replacement parts or accessories, visit www.hauslane.com Contact Us We’d be happy to answer your questions or resolve any issues you may have.